-
Posts
2,939 -
Joined
-
Last visited
-
Days Won
49
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by #Rekd™
-
-
9 minutes ago, gch said:
linking my seat
Linking your Mastercam license to your email login.
-
Have you tried building it from scratch within the toolpath? I
-
Hopefully this is just a small blip in your journey to better employment!!! Wishing you health, wealth and happiness!!!
- 3
-
16 hours ago, JOVATO8 said:
mill a boss on a flat bar
We don't care what you want to do to your boss.....keep that between you and them!!!!!!!!!!! :D~~~~~~~
- 3
-
10 minutes ago, cncappsjames said:
Now instead of just paying for a service call and parts, the owner paid for a flight, a rental car, AND Applications Engineer service call. Which if the shill errrrrr programmer would have put his ego aside for 60 seconds the problem could have been solved remotely. The owner was livid... understandable.
Remember kids... ALL CODE MATTERS!
And they have Camplete and aren't using it...... makes zero sense.
- 1
-
You are practically next door to Barefoot CNC (Mastercam reseller), contact Jimmy.
- 1
-
Do you have a Mastercam file as it will help in solving your problem?
-
Likely best to get your Applications Engineer in to help configure the machine correctly.
-
Flowline? Or can you use a chamfer end mill and just use contour?
-
33 minutes ago, Aaron Eberhard said:
This morning, I was banned!
About time!!!!!!!! J/K!!!
- 1
- 3
-
Try reaching out to @mkd he was working with Heidenhain controls I think.
-
Possibly flowline is a better option but without a file to look at it is just a guess.
-
16 minutes ago, Mick said:
Well.... Consider it a form of programming QA/Insurance.
One crash on a high end machine will cost much more.....
-
You should post this in the Industrial Forum, you will also need to attach a valid Ziptogo file if you want others to take a look at it.
- 1
-
To change these colours....when in Verify go to File - Options - Graphics and make your changes.
- 1
-
Easiest way is to only create the 1/4 of your solid then use Mirror to duplicate each part or parts as needed.
You can cut that solid using the extrude-cut function with a complete chain to cut it by. You can also use Model Prep push/pull and reduce the model to the 1/4 shape and then use Mirror.
- 1
-
Uncheck "Workpiece" and check "Stock" where it say "Visibility"
- 1
-
Back in high school we had an old German welding/ drafting teacher, much like G-Code describes (drill Sargent/ taskmaster). He would make students cry. I still remember everything he taught us (well I think I remember!!!).
Yes drafting with a T-Square and Vellum paper!
I had an employee retire after nearly 40 years, he didn't use computers.... he would make "quick sketches" (his description) that were nothing short of works of art. Everything neatly scaled, shaded and sectioned and dimensioned immaculately.
- 2
-
-
Could you modify a duplicate solid (remove the upper portion that is overhanging the undercut area (make the model shorter by that amount)). Then surface it with a lollipop mill?
-
I am not onto MC2025 but would like more information in general about when and why you choose these different options.
learning more each day!
-
Axis Substitution requires a different method when trying to transform rotate. You need to use "Translate" not rotate and "Coordinate" not tool plane. Then on the next page use "Delta" for Method.
Rotary Ø * pi / # of pattern instances
- 1
-
35 minutes ago, gcode said:
Yes, but the duct tape, bailing wire and chewing gum holding those UMC-750's together is highly susceptible
I think it is wet carboard.....
- 1
-
Are you doing a spindle and axis warmup before measuring your tools and offsets?
4th "A" Axis Feed Change
in Industrial Forum
Posted
Without a Ziptogo file it is hard to tell exactly what is happening.