We run a 718 Inconel job faster than I've seen anywhere. Here's the recipe: 1) 1.25dia X 3flt Kennemetal Facemill (.25rad inserts) 2)Kennematal ceramic inserts: KIPR125RP43540 3)4584 RPM and 41.25 IPM. 4).100" axial cut 5)Full dia cut 6)Run dry! Oh yes.. 7)50 taper horizontal mill. You will see the prettiest color of orange-red chips spewing off the cutter. The work doesn't get hot and you get great cutter life. HTH Dan

Jim, Font is default MCX Box. It doesn't mater how I pick...shift-pic, window-pick, pick individual entities. Doesn't matter how I drag. Crashes every time. I'm updating video drivers now. BTW, my platform is a brand new Dell with dual core Xeon's.

I'm crashing during a DRAG. Please do this: 1)Create-Create Letters. 2)Type in: 1 2 3 4 5 6 3)Xform-Drag 4)Window-pick any number. 5)Press Return key. 6)Click anywhere on the screen 3 to 5 different places to drag-copy around what you've picked. Please let me know how it goes. Thanks, Dan

Any body see a problem with this setup? Chassis Mini Tower First Processor 3.4 GHz Xeon 800 MHz FSB ( Supports EM64T ) Second Processor 3.4 GHz Xeon 800 MHz FSB ( Supports EM64T ) Memory 4 GB DUAL-CHANNEL DDR2 SDRAM Chip set Intel 7525 with ICH5R L2 Cache 1 MB First Hard Drive 160 GB S-ATA (7200 RPM) Second Hard Drive Disk Controller Serial ATA Video Card nVidia Quadro FX 3400 256MB Sound 16 Bit SB compatible (int.) Optical Drive DVD / CDRW Combo Keyboard Std. 104 key Mouse 5 Button Optical with scroll Network Card 10/100/1000 NIC WuOL 3.5" Floppy Disk Drive Standard Headphones Standard Operating System Win XP Dell Factory Load Thanks for any replies. Dan

HardMill, Video tape this Inconel cut. Its awesome to watch! ... Here's the recipe: 1) 1.25dia X 3flt Kennemetal Facemill (.25rad inserts) 2)Kennematal ceramic inserts: KIPR125RP43540 3)4584 RPM and 41.25 IPM. 4).100" axial cut 5)Full dia cut 6)Run dry! Oh yes.. 7)50 taper horizontal mill. You'll see the prettiest color of orange-red chips spewing off the cutter. The work doesn't get hot and you get great cutter life. HTH Dan

Jamey, Whats a email for you? Dan

We run a 718 Inconel job faster than I've seen anywhere. Here's the recipe: 1) 1.25dia X 3flt Kennemetal Facemill (.25rad inserts) 2)Kennematal ceramic inserts: KIPR125RP43540 3)4584 RPM and 41.25 IPM. 4).100" axial cut 5)Full dia cut 6)Run dry! Oh yes.. 7)50 taper horizontal mill. You will see the prettiest color of orange-red chips spewing off the cutter. The work doesn't get hot and you get great cutter life. HTH Dan

Greets to the group!! My Spaceball 5000 makes my graphics jump (rotate) every once in a while, say every10-15minutes. Anybody else having the same deal and found a fix? Thanks!1 Dan

Makes sense now. Thanks.

I get this in Flowline. Using SP1 because I have to. MR1 causes me post problems but works the toolpath fine. When I read it into SP1 its screwed up again. Is there a work around?

V10 is coming along well but still has it's new-program growing issues. IMO it's about a toss up to jump into it now and go thru the learning curve or wait for MR2 or later rev's to get the same reliability as 9.1. There are some groovy V10 functions though. When you make the jump, drop me a mail and I'll try to help with what stuff I consider handy tricks. Dan

Note to self: Learn the Ea. Manager! Thanks Iskander. Dan

Slick, Yep! Same exact problem. Exit out, restart mcam and it's fine. Luckily it doesn't seem to be something that will cause a crash like when other things start acting funny. I use hide all the time and would really miss the flexibility of not having it. The ability to hide all of any entity/attribute adds alot of control IMO. Hows things in Marysville? You're right in my neighborhood. I'm in Everett. Things are pretty busy these days. Dan

Greets to the group. I'm sure there is a way to do this but I can't remember how. What I have is a irregular surface (solid) with points that I need to do circle-mill operations on. How can I quickly generate vectors that are normal to the solid at the points?? Many thanks, Dan

Thanks.