If he is able to lower from 450 to 250, I would not trust him the next time. I would tell him to put the holders somewhere the sun don`t shine

It,s a pricy flatscreen http://www.spectrum-systems.com.hk/Polyu/P...List/moncrt.htm

Danke Gunther , did something change? Johan

My X+ also works fine in X2MR1. Make sure you got the latest version. Johan

Don, I did a side by side install, and I always innstall with the softwarekey pulled out, dont ask why, it was a tip from my reseller. I hope you have the backup files...

Downloaded in 17 minutes, installed in 10 minutes,15 minutes of finetuning chooks. ALL WORKS FINE Up and running within one hour , I can remember times it took more then half a day to get it running... Great work! Johan

Installed a new X+ and all is fine now Gunther helped me out. (thanks again) Johan

Hello All, some of you might remember the topic I placed o month ago: I couldn`t open a second session of Mcam. Today we installed everything on a new PC, made an image and imported the image on my PC, everything worked fine, I could open 4 sessions of Mcam without a problem, untill i installed X+ All teh problems were back, I couldn`t reverse it, so i reinstalled the same image again. So now i`m fine. Only it seems that X+ is cuasing me problems, bit wierd tho. Am I the only one? Johan

I just make a new library in the toolmanager and fill it while creating tools for toolpaths by clicking on "save to library" in the define tool window. Next time when i need a specifik tool library when programming, i can select the library in toolpath parameters. Just click on "select library tool" there you can select the library you want. HTH Johan

I could also email you the files, just shoot me an email. Johan

Steve, I had this issue before, also after a crash Only in W2000. Somehow teh files concerning converting solidparts was corrupted. I had another user email me the files from the sworksdata folder, and the problem was solved. You could try it with your laptop. It´s in the Mcamx>common>sworksdata HTH Johan

McamNut,(BTW like your avatar,Scratch) Actually, I don`t know, my old pc could barrely handle 1 session.

Anyways, thanks all for thinking with me! for now i`ll stick to 1 session at a time have a nice weekend ( due to timedifference with most of you, I`m allmost about to go home)

Steve, it appears for a moment in the task manager, then it dissapears. also tryied a repair and with teh virusscan disabled, makes no difference. cald the IT guy, he didn`t know either.

usbHasp and XPpro