John@WMM
-
Posts
110 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by John@WMM
-
/ G91 G28 Z0. / G28 X0. Y0. / G92 X10. Y10. Z10. This keeps showing up once in a while in my posted code? We have several different machine defs/posts in our shop... % O0 ( 1008847 CLIP HANDLE ) ( DATE - 18-04-08 TIME - 13:42 ) ( MCX FILE - 1008847_3D.MCX ) ( NC FILE - 1008847 CLIP HANDLE.NC ) ( T1 / 1/2 XPOWER / H1 ) ( T2 / 1/16 BALL ENDMILL / H2 ) G20 G0 G17 G40 G49 G80 G90 / G91 G28 Z0. / G28 X0. Y0. / G92 X10. Y10. Z10. ( TOOL - 1 / 1/2 XPOWER ) ( ROUGH ) T1 M6 M01
-
I use .dxf output from Solidworks .slddrw for simple 2D wire edm programming. Works good...
-
Mastercam X MR1 My Mastercam has been doing something really weird. Before I would save a file and it would automatically have the .MCX extension. Now it just has the name and I have to type the .MCX?
-
Whats the address to the Mastercam Extranet's main page? Thanks! -
Weird... I just did it on my pc and it worked the 1st time. Did it a second time and it didnt work. I wonder if its something in MC thats telling it a size at start up? Most pc's running Windows will remember the size and position when dragging to resize and then restarting.
-
"Unfortunately, it goes back to a small window when closing MC and re-starting." Thad Thad, Stretch it then minimize it then restore it. Do not maximize it at any time before closing or it will not remember the size and position... You can maximize it after the restart. Give it a try Jack
-
Go to the restore window size and stretch each corner of the window until its at full screen size. Then close it in that position. Now reopen and maximize the window. Now if you accidentally hit the restore button it will only restore down a very very small amount
-
quote: How close do you need them? Keep in mind, the moveable jaw is exactly that....moveable. Thad Im with Thad on this one... That said it all...
-
Thanks for the info I will give it a try.
-
Hi I have a mill setup to machine 3 of the same part from one piece of stock in a row Example #1 #2 #3 I have my origin and tool paths on part #1. What I need is to machine the other 2 parts without running all the toolpath/chains ect... How do I do that? Thanks Jack