Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
If you use the template file you can open it in mc and move the origin? That being said I'm not sure how your layout can be moved to match the templates new location.
Could someone show me an example program of how the g code is setup for tailstock in and out?
face
center drill
tailstock in
turn od
tailstock out
We just started using Mastercam in the lathe dept and we are lost on this one. Is there a parameter we need to set to use g code for this? Thanks
Save your long burns for the night time, run your short burns in the day. I have made different size stainless v-blocks and alot of fixtures. Its nice to have a vise check out www.gromax-usa.com One of the hardest things about wedm is holding the parts...
Being efficient in wedm? "With wedm experience comes efficiency"
You will have to change your geometry to get a constant land around the cutting edge when you have a contour like that.
I cut a round part that had a step with a radius that was right in the middle of a wired slot with clearance taper with land on top. I had to back off/make smaller my profile geometry untill I was getting a land in the radius area... Its not easy and it will take some practice cuts to get right.
I'm looking for information on communication/dnc systems that are available? At the shop I work at we have several Mastercam seats each one hooked to a few cnc machines where we use a manual switch box to send and recieve programs.
My pc seems slow.
5 MIN 32 SEC
Dell Precision T3500
XEON W3520 @ 2.67 GHZ
3.00 GB RAM
NVIDIA QUADRO FX 4800
XP PRO
[ 02-13-2010, 09:30 AM: Message edited by: Jack Straw ]
I did my first taper program with Mastercam this morning. My problem is the taper is running the wrong way in the machine? If I translate 3d bottom to top then the Mastercam part file looks upside down but the machine runs correct? This is a Fanuc Robocut... Thanks
Inside Solidworks you have a choice on saving models "Draft Quality HLR/HLV" or "High Quality HLR/HLV" If saved as "Draft Quality" it will import into Mastercam as a spline. Our Engineering Dept. started saving as Draft Quality to save space on their file server and I started having this spline problem all the time.
I have been running 2 fanuc robocuts for about 5 years. The fanucs seen pretty good. I ran an older Brother before the Fanucs and I didn't like it that much.
They are SW2006. I did try to open some random files and they are working now?
I also installed the Direct Conv. - Mastercam X3 Direct for Solidworks Maybe that fixed it?
I have another pc I have not installed the Direct Conv. on yet. I will try a file that crashes on there then install the Direct Conv. and see if it fixes it...
My X3 will crash when I open a solidworks .slddrw
I was really looking foward to using some of these 2D .slddrw files for my EDM work but X3 will crash everytime.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.