mpmaster

Hey Pinky, just post your bank account info, I'm sure someone will help ya out.........

Try here Pinky

or

Here

You tell his SHORTY........

"Don't try. DO.......or do not"

Trying a new moldbase DMS usually we use DME moldbases.

They are aound 75% or so lower priced. Anyone else use them or maybe even make them.

The base came in alright, but is a little stained from the oil they coat them with to keep from rusting. So far that is the only complaint, just doesn't look good with stains for a new base.

Hey..........it's a gif........

logo.jpg sounds right

Right mouse click on the logo, in the set-up sheet and pick properties, it should tell you the name and where it is located. Then replace with your new logo using the same name using windows explorer.

HTH

mcamx.config

Works fine here.

How about some screen shots or put on the FTP???

I thought it was

John "Don't call me Monica" Paris

Thanks Roger

The gas tank video is cool..........

Sent to Mastercam QC

Have to wait and see now.

Make that 3 seats.......

Type in Level "Number:"

hit the Tab key

Type in the "Name:" for the level

hit the Tab key

Type in the "Level Set:"

hit the Enter Key

Everything looks fine

Then

shut off your Level Manager

Then

Turn back on and everything is there, but the "Level Set:" info

I have tried this on 2 different seats here they both repeat the same error.

Ron spaces can be a problem i agree.

My problem is I type in a message and hit enter on the key board it shows up in the layer Level Set box.

Then shut off the Level Manager and turn it back on and what you typed in is not there anymore.

The only way I can get it to stick is double click in the Level set box on the layer you want.

It used to work in both places B4.

Hope this makes sence.

Anyone been having trouble with the "Level Set" remembering what you type into it?????

If I type in the lower left box it doesn't remember what you type.

If you double click in the "Level Set" box in the level you want it remembers what you type.

I have never had a problem with this until X2 MR2 SP1

I have done a search and found nothing so far on this.

Do you have the lead out set right?????

The same as the lead in?????

8:54-10:08

I've seen a lot better response time out of you than this.........

Thanks again.......

I think i remember seeing this talked about B4

Thanks Pinky

X+ has a create tool list........will this work for ya????

Hacsta.......our Designer tried on his computer and it didn't work, so he merged my fix on my computer back into the drawing.

I tried your way and it didn't work here.....not a 100% fix I guess.

A LITTLE buggy if you ask me.....

I added a .0001 fillet, blew the fillet away and trimmed.

Shouldn't be this much work though.......