Just lookin back............got your problem fixed yet?????

if not

try

Check your control definition under Tool

and set it to "add to tool", length 0, diameter 0

also use:

Tool numbers sequentially

HTH

Had trouble when I 1st started with X3........... worked on some settings..............no problem since.

Now back on topic

Seat time

Didn't have time to learn.......just sat down and did it.......had a mold to build.....learned as I created the mold design then started creating programs.

It was a challenge and I made it fun......that was back in the ge3 days.

Soak up as much info as you can from this forum.......you might have to read thru a few off topic things.......but a few laughs neva hurt anyone.........just ignore the Iowa jokes.

If I remember right James answered my 1st question on this fine forum.........

Thanks James

Off topic

James.........your usc nonstarter quarterback for the Patriots needs to step it up a little and get me more points.......he has this week off to work on a few things.

Just had to get a usc thing in there didn't ya James............

15 yard penalty no make that 25.... and loss of down.

off topic penalty

You didn't get a t-shirt in yours??????

Cliff notes

You have plenty of time til Xmas..........it's only.....................Sept 17..........

Welcome to the furum

Use all the time

as stated above

Fast way to organize your levels so you can turn them on and off as needed.

I was being serious!

Anyone have a video on how to get to the HELP section?????

Who's ready for some football???????????

Happy un-Birthday

Happy UnBirthday Chippy

Sounds like you should be using Wear........I think you would like.........no need to offset your pockets.

contour ramp

used a lot

with wear also

"."

Thad using an old trick........

Pretty good for a Meechigan guy........

I think I have 2.........

Brown nose

All from 'IOWA' will be shipped a Mastercam T-Shirt and mouse pad for having posted over 10 messages.

Thanks 'Iowa' for your participation!

In again..........in Iowa

Not working now...........

IN

web page linky

Look @ top of the page..........

Or click here

How about this........

on our &*%$# Hurco

the main power switch on the back

Red is ON

and

Green is Off