Morning Brian

Morning everyone........

Been a while...........I've done some broaching on our Haas..........I think I removed the "S" from the post, or put in "S0"

HTH

Hey hardmill.............got that video on this done yet?????????????????

Like Thad is sayin...........

I use save some in X3 this same way........so I say it works the same.

final answer

Sharles, what is your step over?

I usually start setting the gap the same as my step over amount.

example: For a .005 step over I use a .005 gap.

works almost every time for me.

HTH

I sometimes use to hide solid construction line work, so another person / co-workers can't ruin a solid.

I also use Levels for this.......Because our designer couldn't find the Solid line work ........and mark the level "Caution Solid Construction Line Work".

Hide stuff

Yep

Tyler or Krystal.........could ya send me an email B4 ya post in here for the next top 5 posters for some free SWAG.........That way i might have a chance.........

I didn't make it until page 3.......

Thanks

Midwest

We need pic's

Krystal

I believe ya............

email meh if ya need an addy to send the shirt and the 2009 In-House Planner.

Had to go back and check and alter some programs i had written ahead of time for a new mold.......got them changed and altered the operation defaults..........should be OK now.........

Guess I got lucky.......

+1 gcode

Upgraded with no major problems here, use X+ for our set-up sheets.......been using X3 for quite some time.

Now that's better............

Kannon..........U forgot 2 say a size........

This thread has been

how about the LAST 5.........

ok

someone lock this thread now PLEASE........

Is it too late 2 B in the top 5??????????

XL would B nice

We need pic's............from the 5.........when ya get the T-shirt........

Welcome back

fissed

I use and like the x+ setup sheet

there is also a toollist, but I don't use it.

HTH

Try altering the Gap settings.

add to your right mouse click.

HTH

Don't need the work around here...........works just fine 4 me