malibu
-
Posts
357 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by malibu
-
hi all we are planing on changing to a darker stain color on our kitchen cabinets. golden oak to mocca .... please advice
-
hi all, must be something Iam doing wrong(mr2 sp1) using a .25 and remachining with a .0625 the small cutter does not go to all corners . any idea? thanks
-
this bird? If you are a customer running Mastercam Version 7, now is the time to update your software. With the release of Mastercam X3, scheduled for First Quarter 2008, support for Mastercam Version 7 will no longer be available. If you act now and update your Mastercam system, not only will you retain your service, but you will save over 70% of the cost once Mastercam X3 is released. And that cost includes Maintenance, which means you get Mastercam X2 now and Mastercam X3 when it is released.
-
thank you !! Collin
-
mine works ! just installed inventor 2009 and mastercam direct was on my menu bar. was I lucky?
-
hi all, my lathe post is outputting dia vs radius dimensions. is there a setting to change in mastercam? haas tl2 post thank you
-
hi Ron this is what I am getting ( no good) canned mode od theading. % O0001 (PROGRAM NAME - T) (DATE=DD-MM-YY - 14-04-08 TIME=HH:MM - 08:51) (TOOL - 1 OFFSET - 1) (OD THREAD RIGHT INSERT - NONE) G0T0101 G97S300M03 G0G54X1.5Z.2274 G76P010029Q0.R0. G76X.8466Z-1.P767Q273R0.E.125 M30 % need to get something like this this % O00005 (OD THREAD) T101 G54 G97 S500 M03 G00 X1.6 Z0.15 G04 P1. M09 M24 G76 X1.48 Z-1. K0.03 I0. D0.015 F0.05 G00 X1.6 Z0.15 M09 M30 % please advice
-
hi all I am using a haas post on a tool room 2 machine . how can I change it to post k,i,d,f vs Q,P,E ? thanks
-
Iam getting this error, please advice works sometimes (unable to estimate stock extents use stock setup)
-
thanks guys, Mark @ ccc took care of me. thanks jay
-
hi all, Company just bought a haas lathe TL2 Please advice on post . thanks
-
fbm is good idea (m2cents)
-
if you are using mastercam you are a programmer already. just ask your boss for a raise
-
thank you michael
-
pete, I can not find this info HKCUSoftwareAutodeskInventorRegistryVersion12.0UI Customization V5Toolbars AssemblyMenuBar PartMenuBar Mastercam:MastercamDirectX can you make a batch file or something like that? thank you
-
thank you
-
hi all, updated inventor 2008 to sp2 and now I get 6 mastercam pull down menus with 4 more mastercam direct in them. any ideas? thank you all.
-
the pic is to big . try to make it smaller.
-
got it thanks guys
-
hi all, Is it possible to jog out of the job and resume on same position(haas machines) Like fadal’s feature? thank you all
-
Hi all for some reason I am getting this error on a haas machine. Missing (…….) please advice Thanks all
-
copy and paste go back and delete original if needed. don't cut and paste ! good luck
-
will do thanks Tony
-
Does anybody have a roll die video? I think the super bowl drained my brain .I couldn’t repeat the tool paths on the sample file. How can I get the contour roll die to use only one chain? (geo shows only one chain) please advice.
-
I feel mx2 mr2 sp1 is very stable now which old version should I remove from my computer first ? Kept all updates since 9.1 mr0105 thanks all