mikechvz
-
Posts
131 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by mikechvz
-
im gonna check that out in the morning
-
my computer is: AMD Athlon 64 X2 Dual 2.41 GHz, 1GB RAM XP Pro SP3 nVidia GeForce 7600GT when i use v9.1 everything works well and i can see things nice sharp and clearly. When im using X3, my part flashes and looks like its 'reloading' everytime my autocursor touches it. Because this is happening, there are mary things about my part that i cant even see in detail. What graphics card should i get asap, or any other recommendations
-
22" acer 1680x1050 19" acer 1280x1024
-
i have had the same problem, id like to know too if someone ends up answering this
-
i put one up there for you called 3820m52-mike see if thats what u wanted, im guessing it might be
-
its cool, just trying to get it back but its not a biggie, just a personal preference.
-
i know that can be done on x2 but i dont have that on 9.1
-
I was using x2 today between using 9.1 and when i went back to use 9.1 my level manager was only white for each level instead of alternating white and grey. Is there anyway to change that back?
-
I still use 9.1 also. I have X but just havent really played with it too much. Never got the post finally setup and thats the real reason i dont use it
-
thanks guys, i got it working
-
i cant seem to get my tool to work on both sides of the check surface like it usually does on any other part. The help im getting is working, i just cant get it right. ftp site, mc9 folder, MAC file. any help is useful, thanks
-
thanks josh actually, maybe i wasnt clear with what i wante to accomplish. i was actually trying to surface that face on the backsude that has a slight angle that id have to get with a lollipop. So i was also using that purple solid to represent where my tab would be holding onto the part that i wanted to use as a check surface so my tool wont cut off my tabs. What hardmill suggested worked, but only on one side of the check surfaces. now i need to adjust it some more to get it right. Its always worked so easy, not sure why this one just wont work right yet.
-
gracias!
-
i posted a file on the FTP site under the MC9 folder titled MAC. I've had help with this kind of operation before but this time i cant figure it out to work correctly. Its only the last operation on there that needs some adjusting. Any help and pointers are always appreciated. Thanks in advance
-
not slowing down at all here in San Antonio, TX
-
i really appreciate it, hadnt figured that way out yet. thanks guys
-
i've tried a few different surface toolpaths but cant get it right yet with those options you gave. how do i set entry/exit
-
I finally was able to get onto the windows view of the ftp site and upload a file in the v9 folder called mike help. Im trying to surface the face thats angled inside with a .500 dia lollipop and a .375 shank without making a rapid or cutting vertical and taking a cut out of the surface. i just cant figure it out again even though i've done it before. Another thing, now that i got it on there i cant log back onto the ftp windows view, just the original. Any help is appreciated as always.
-
thank you.
-
not a problem, there are no toolpaths. let me try real quick
-
i need to send a v9.1 file to a friend who only uses v8. How can i save it to where when i email it he can open it, or any other option
-
that worked!
-
I was looking for a thread on how to open up images or pictures in mastercam after formatting them somehow. I couldnt find it, so...is there some way to open up a picture i have in any way to eventually be able to create some 2d geometry just for engraving purposes?
-
i didnt think so, but they were telling me i could. thanks, appreciate it.
-
i got a file in X but i still do my programming in v9.1. they want me to check it fast and i'm not to fast in X. can i configure it to 9 somehow?
