thank you.

We used to have two nethasps at different IP's. Our IT guy changed it to have both nethasps on one server. The nethasp I was tied to before the switch had mill level 3 and 5axis. Now with the addition of the other nethasp I am able to get a lathe and solids license. Ever since the change I am unable to create a bounding box, unless I grab a solid license. But we only have one solid seat and I shouldn't need to be taking it to create a bounding box. Can anyone help? edit for more info; I created a .stl in Solidworks and would like to select it in verify. But Mastercam becomes unresponsive unless I have a solid license.

thanks again

thanks for your reply Marshal. gcode, I understand SW front = MCAM top; just wondering why the two packages are set up the way that they are. htm01, I understand how to create a local coordinate system in SW, thanks. edit: Marshal, can you post the link?

Out of curiosity, does anyone know why this is? Is one way more widely used then the other? I have really only used Mastercam and Solidworks. thanks

thanks a lot! problem solved.

1min 23sec xeon w3520 2.67ghz 4gb quadro fx 1800 x5mu1 win7 sp1 64bit

anyone out there who has had this issue and understands what resolved it?

yeah, thanks. our IT guy says I shouldn't have any issues with permissions... but x5 still throws the error.

is this correct?

looks like my issues are not permissions related. anyone have any other ideas?

Where do I specify the location of insert.tbl in Mastercam? It looks like I have full permissions...

does this help? WATER GROOVE CURVE.MCX-5

yup I'm good with Mastercam. unit just displays the 3d connexion logo?

so far so good