Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hello.. I have never engraved before and im sure it is very simple but i am have trouble with the chain.. the letters are "FARO". 32 chains and it is only doing the "O" Not sure what i am doing wrong
Hello... I am in lathe and am trying to import some toolpaths.. I get the toolpath I want but the stock recognition is greyed out.. Any help would be great
hELLO... we have a new kia vertical lathe and need to set the parameter for the M01... Need the machine to start back up afer the M01 and right now it doesnt.. Thanks in advance!
Hello... I pulled in a drawing that has thick lines.. was wondering if someone could tell me how to select the whole part and change the line thickness.. I messed with the attributes but no luck.. Thanks in advance
Got about 100pcs to do that have a .500 dia drill 7.750 deep in 17-4 stainless... any suggestions on feeds and speeds, peck depth to make this drill last? only have one drill to do this...
thanks
I am programming a Hardinge Quest 8/51 with a sub spindle and need to transfer the stock from the main to the sub and have never done this before and no one here to help Just not sure what numbers to put where... Would like a walk thru over the phone if possible.. Thanks
Does the post have to be set-up for the Force Tool Change to work?
I tried useing it between a rough and finish cut using the same tool but it did nothing..
Thanks
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.