Paul Felger
-
Posts
192 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Paul Felger
-
Where is the Machine Axis page? Im in the Machine Def. Manager but not sure what im looking for. Thanks
-
Its been awhile, but where do you go to set the parameter ref. points default? Thanks
-
Just got X3 today, what is the best way to transfer my X2 posts to X3? I have not done this before..
-
I am trying to profile a face groove using a groove insert,also using groove tool path. I need to use the lead in and lead out but it is greyed out. Is there a way to activate this or do I just make edits to the prog? Thanks
-
Just reprogrammed it the same way with no trouble
-
John, I use the Analyze-Distance all the time with no problem, but I will have to reprogram this part the same as last time so I guess well see if it hapens again. quote: I would also suggest you get into the habit of saving your work along the way Yea, This sucks
-
mc X2 mr2 ps1 I have had this happen 3 or 4 times now, I will have a program almost done and use the analyze-distance and it wont let me green check out of it. I can drag it around and thats it. I dont have the prog. saved and the last time this hapened I had to Ctrl-Alt-Delete it and lost everything. Could this be a bug or am I doin something wrong?
-
Cam, Thanks a lot Ive been wanting to use custom tools for a while now. This forum is the best, I have learned more here than any book out there.
-
quote: Ref points ref points ref points I wouldnt dare turn without them
-
Im back and I am still stuck, Still cant figure out why the tool doesnt show up on the backplot
-
The tool level is 110 Is this what you are asking? My day is almost over but I will be back in the morning. Thanks
-
Ok, Im getting a little closer. I have the tool drawn with the corect colors, in a seperate level, and saved it in the tool library. I have reselected the new tool regenerated it, and I dont see my tool or stock removed when I backplot it.
-
This is what I want but with a 25deg insert instead of 35deg I have never used custom tool before, thought maybe someone could give some step by step. Thanks Paul
-
I have found the custom tool page, but I dont see where you can select or change a angle.
-
Is there a way to changed the geometry on a 35 deg. insert? Im doing face work on a mold with custom ground tools and would like to change a 35 deg. insert to 25 deg. in MC. Or am I going to have to select a differant tool and lie to it like I usualy do?
-
Thanks Kelly
-
I got the email but cant seem to open it
-
If someone gets a chance, I would like to check it out. Thanks [email protected]
-
Yes, it was the stock.. I was just getting some quick geometery and didnt think about the stock Thanks
-
-
hold on
-
-
Overlooked that one!
-
When I try to open the FTP site I get an Error that windows cannot access this folder. Is that site down or is it my computer?
-
Thanks Mark