Paul Felger
-
Posts
192 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Paul Felger
-
I am using a AMERA SEIKI TC-1L post, where are the settings for the spindle? In the parameters I have feeds and speed defalts set per tool. As this is not a big deal at all, I have just been editing the prog. but if I can fix it that would be nice.
-
X2 MR2 Lathe I am fairly new to mc, my question is after I post the program on the editor screen I get a G99 on the first opp. and a G99 on the last opp. Also there is no M3 in other misc. opps. Is this a post issue or is there a setting that needs changed. Thanks
-
Thanks Crazy, That sounds easy enough.
-
Thanks Dave, You gave me the right answer Dave, Thanks We do some crazy undercuts and face profiles, out of the box cant produce.
-
Thanks John, I have taken classes and it was all out of box tooling in the class. That is what I am use too, but this is a new job and they use custom tooling. Dont think I need a class when someone like you could answer my question. Yes or No can you custom draw your tools on X lathe?
-
Hey guys, I am using XLathe, and while on the subject I use kennamet tool library the most and use a lot of custom ground c2 tools in the machine. Is there a way on lathe to draw up my own tools insted of modifying the inserts and holders? We do a lot of face and small id work. Thanks,Paul
-
We are being pushed to get a job done, and I have a job on one lathe and want to set-up a differant lathe with the same program from mastercam. I have heard that this is very easy but have never done it. machines have differant post. Thanks,Paul
-
found it.
-
I dont think the post is set up that way, but I may be wrong. By the way, how do you access the post on X?
-
Thanks guys, I will try that.
-
oops sorry its a lathe..
-
After finishing a toolpath it sometimes and only sometimes wont let you change a tool rad. without a collision. I do this a lot because we use a lot of custom ground c2. Thanks Paul
-
Also, I have the auto save set at 5min. How do you access the auto save to retreeve a lost file.
-
Pete, I think I sent it to you. I did reproduced it and in the parameters I had the tool comp. set on right when it should have been left, I clicked the green arrow and got kicked out. Thanks Paul
-
Im using X lathe, and if make an error in a toolpath, Mastercam shuts down all the way instead of warning me or having a wreck. Is this normal or can I fix it?
-
Thanks everyone, I will logon at another time with more detailed info with the trouble I am having. Just was not sure if it was normal to update or patch wright off the bat, and the maintenance has expired.
-
The company I am working for has both 9 and X lathe, the guys have been working on 9 and I am the only one using X since they installed it. My question, is there any updates or patches I should know about? I have noticed some minor glitches, but dont know how to fix them.