When I select a point it fills it out to 6 places. I changed this once before but it was not in windows 7. It was in windows under somthing that made no sence to me but it worked.

YES Exactly

I know it can be changed because I have done it before. Right now it displaying 6 places behind the decimal. 3 Is all I need. I just cannot remember how I did it before. I thought it was in somthing in windows.

Im talking about the operation manager. Like setting the depths of a cut.

How do I change how many places after the decimal mastercam shows? Thanks

I Loaded firefox and now it works. I do not have a lot a time to figure out why it quit working. I also assume it was an update somewhere. I update everything as I am notified to do so if its not automatic

Ok I will try firefox. Just seemed odd that it worked in chrome until a couple weeks ago. Thanks

I am still having trouble with this if anyone else can help. I dont see a settings tab. Im probably missing it.

where would I find that in google chrome?

My logo shows up in print preview but it does not show up when I print it. I have tried different browsers and they all do the same thing. It was working fine but now has stopped. Any ideas would be great. Thanks

ok I will give that a try when my material comes in. I looked at the database and it seemed like they were running higher rpms so thats is what I was going by. Thanks for the help.

Just a small block in a vice in a 40 taper machine. I was goin to try 10% width and .006 ipt and 800 sfm

Basically just looking for speeds and feeds for dynamic area mill in CRS pocket 1.00 deep using .500 general uncoated 4 flute carbide.

Thanks

Ok thanks. I also got it to work if you use helical bore instead of contour ramp.

I am trying to have less posted code when doing a helix or ramp down 7 inches deep. Every option I have changed in the control arc page doesnt change the posted code. it stills posts xyz moves every few thou movements. Anything else I can do. I am ramping at 2 degrees and the machine can not keep up with the code and jerks to much. Thanks

We have mostly haas and a fadal and a couple fanuc controls. I will have to experiment a little I guess.

thanks guys

I see mine is set to break at 180 degrees. Should that be changed to quadrants as well? What is the difference?

Thanks again.

thanks, Is there any reason not to have it set to radius all the time? Currently it is set to delta start to center. All planes was already checked.

How do I get it to post our using R instead of I's and J's so I get a smaller program if For example Im ramping down 7 inches in a 2.375 hole with a 2.00 cutter

Thanks

ok I got it to work with firefox after turning on print background. I couldnt find that option in chrome. Just curious where to the screen shots get saved to. I have never used that feature before. Thanks again for your guys help

How do I change which browser it uses? I do not have explorer but I have firefox installed already.

Well I got my logo to show up until I print and it Does not show up on print preview. I am using google chrome. It worked in x5 so I'm not sure what it is I need to do or what changed. Any Ideas?? Thanks

Thanks. Got it.

I am still having problems with the logo. Maybe you can see what I am doing wrong. Is there somthing I am missing?

/* company logo <div> - location and size of image*/

.LOGO{

position:absolute;

/* size of your logo */

width:300px;

height:61px;

/* position of your logo */

left:8px;

top:8px;

/* location of your logo */

/* local */

/* background-image:url(file:///c:/logo.png);

/* internet */

background-image:

Thanks

And how do I get it to only display each tool one time. I dont need it to display for each separate tool path. Thanks