Dan@clover
-
Posts
100 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Dan@clover
-
thanks, Crazy^Millman and Jparis. It was making me crazy, but is all good now!
-
Is there a way to change the tl_dia from rounding up? The set-up sheet I'm using is from Gunther Massimo (setupX+_X2MR2). Dan
-
could you create a net surface patcth over the hole?
-
I seem to have to click twice on any of my selection's in the ribbon bar. Is there something I should change? Dan
-
I've had co-op students in the summer, and would train them on a dynapath controlled machine. I have them cut spruce 2X6's. Just cut done to rough size, glue together for thicker mass. Cheap, no damage to cutters, quiet, and did I say cheap. Dan
-
those spike looking things are surfaces, there is a problem the translator. I would try to import the file differently, maybe .x-t, or .igs would work better for you. hope I helped Dan
-
Harold, to use control cutter comp at the fadal, you need to use wear. Be sure your head#, tool#,Len offset, and dia offset are set to the right tool. Hope this helps.
-
mine errors out also?
-
found it... replaced it... things are looking good. thanks for all your help. Dan (TGIF)
-
Using the X+ sheetup sheet, I want to change the logo to our company. How do I do that? thanks Dan.
-
If those old dogs don't want to learn new tricks, It's time for some puppies... I had two guys that wouldn't change, so I removed V9 and guess what. They found X2 so much easier, and won't go back to V9. Change is good.
-
Got the latest X+....All is Gooooooood!!! Thanks for all your help! Dan
-
Eric, that is the one I was using... Dan
-
I deleted all the x+ chooks, and it's working fine... thanks Eric! which setup sheet should I download? Dan
-
Thad, I tried your suggestion....no luck. thanks anyways! Dan
-
It used to work, then about a week ago, I downloaded a new setup sheet, now it doesn't hold my settings. would that change the write permission?
-
Hey Guy's Everytime I change the setting's for the operations manager,(e.i:background colour, font), the next time I open a file it defaults back. How you I make it stick? thanks Dan.
-
thanks Lars
-
chaining tolerance is set to .0001. is that the normal? Dan
-
the chain is in the right direction and there are no overlapping entities. I've tried this on other cpu's and it works fine, just not on mine. dan
-
if I check the open pocket cutting method box, the tool only cuts the parameter, leaving an island along the center.
-
I think the answer will be simple, but I'm scratching my head over it. When I chain a open pocket using the open pocket tab, my chain starts half way in the open pocket. How do I get it to start outside the pocket without changing it to climb mill? thanks Dan X2 MR2
-
work's great! Thank's Dan
-
If I try to use silhouetteboudary.dll, masterCam prompts me with an error : .NET Library Error - the appropriate mastercam .NET support dll could not be found. how do I fix that? I'm using MasterCam X2 MR2, level 3. Dan