Daniel M
-
Posts
137 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Daniel M
-
Maximum Zand Minimum Z in Post isn't working.
Daniel M replied to Daniel M's topic in Industrial Forum
John, That was an awesome reply. Best overall lesson I've ever had for insight on what needs to be done in a post to accomplish a needed result. I looked in the MPMASTER and didn't see anything that.....oh wait, just found it. Still, many thnks for your reply. I'll use it. D -
Maximum Zand Minimum Z in Post isn't working.
Daniel M replied to Daniel M's topic in Industrial Forum
Christian, I wish I found this to be very simple as you do. I looked at those sections of my post and I didn't see any 'simple' solution....was hoping for something like "to get max and min Z for entire program change this setting to 2". Any chance you'd give me some more clues? Thanks, D -
MAN! It's bright in the programming office where I work. Are there flouresent lights that are especially made for computer work station lighting? I'm getting headaches here!! D
-
Maximum Zand Minimum Z in Post isn't working.
Daniel M replied to Daniel M's topic in Industrial Forum
I'd like to make it work. Does anyone in this forum have the Max and Min Z working in their post? -
Maximum Zand Minimum Z in Post isn't working.
Daniel M replied to Daniel M's topic in Industrial Forum
Haven't touched it. I took over programming after the 'other guy' left and now I'm trying to figure out what all he had going on in here. The name of the file is Fanuc 4X Mill.pst D -
Something wierd going on here... My post is kicking out bogus numbers for the max and min Z in the header section. Heres whats in the .pst : psof$ #Start of file for non-zero tool number starline, e$ "(MAXIMUM Z", *z_max$, ")", e$ "(MINIMUM Z", *z_min$, ")", e$ Any ideas? Thanks! Daniel
-
Are there any on this site, or any that someone wouldn't mind sharing? Thanks. Daniel
-
Anybody know a CMM savy person that might be interested in doing a little on site instruction on the basics of DMIS? Can negotiate a fee or maybe trade for some Mastercam instruction??? Thanks for any leads. Daniel
-
Was just wondering if there is a good tutorial on how to understand the logic of mastercam posts and how to best edit them. I've done what I've needed to do in years past but it was a bear for me. Thanks!!
-
I'm stumped. I tell it to save as geometry in a specific layer and..nothing. Thanks.
-
Thanks Hardmill. That did it.
-
Greets to the group. Even with the program # field filled out in the Machine Group Properties/Tool settings I still just get Ooooo for my program number. Post issue maybe? Thanks!!