GURU2
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by GURU2
-
Hey Captpaul, just a couple of ideas.... as far as enter/exit @ 3:00, did you try and change the start point of your tool path?,you may have to use the"dynamic" button to do this. for the exit past problem,do you have the "overlap" box checked in the lead in / lead out page?. Just some food for thought Guru2
-
Try using Carmex brand threadmills,they have one's for HARD materials.You can get speed and feed off their website(Carmex.com).I've had good luck with their threadmills on titanium and 60Rc materials.Good Luck!!!
-
in the general output settings section of the post,there should be a question... [#Omit breakup of x, y & z rapid moves] answer no$
-
Try to save it as a iges file format,if you did'nt already try it
-
Turk, The way I send/recieve programs is using easyDNCxp software(easydnc.net)on host computer,then hook up an "octupus"cable(blackbox.com)then run rs-232 cable from host computer to respectives machines,the software allows you to send to multiple machines from one computer. MCX3 Mill3 Lathe1 Wire2
-
11m 50s SYSTEMAX Venture(Desktop) Intel P4 3.06GHz Windows XP Pro NVIDIA GeForce 6200 1Gb 3.06 GHz