Heidenhain has a free program called TNCremo, Run TNCserver.exe and pick your .h file. /Frostfitt

Yes I have the same problem with wrong order and loss of operations during import thru toolpath manager>right click>import. Its nice to import that way, the points are not needed to be copyed to all the imported ops after import that is the case when import thru the operationmanager. Im sorry for that malfunktion and i hope cnc fix the bug soon. This have been a problem sinse X3 and its not migration to X4 to blame. All our X4 seats have that problem when importing from not updated x4 files. This ussue have been up here before and not been fixed. /frostfritt

Ive checked Use 'Free' Mode in Dynamic Spin and the middle weel works fine rotate my 3x3 inc part. Now I have a complex part 3x129 mschined only in the ends. I zoom in the end area I work with and now middle weel rotate fail real bad. It rotates like the centerpoint is lokated in sahara! I can rightclick the endpoint where I want just once but thats not middle weelfunktion. I have the same problem with two small part long distance between. How do I get the dynamic spin rotate round what I have on the screen and not around something else? /frostfritt

Use Z-depth and set the mindeep to .4 Does that do jhe job? /frostfritt

I have a warning here.. Lets say you have a pitch output and MC X4 and want to change the pitch just for once in your tapoperation. It can be done and the new value stick and look fine but the post takes the rpm from the operation and the pitch from the tool. If you post and run that nc file, then the tap and part will go to the blue archive You have to always do a new taptool first. /frostfritt

The dual postingsbug has now got a bugnumber.

In system configuration / toolpath manager : nc filename is set to "user name" here. Its for aviod manual ncfiletransfeer to mashine. So I having the same problem with dual postings after imported operations. I think Iam importing 60% of all operations I make to simplify programing and increase reliability. This importbug has been there sins X3, New for x4mu1 is that FBM Mill does the same thing as imported operations and corses dual posts. Ive told my men to always do a dummy drilloperation the first thing in the file and then ghost it, then future imports and other operations will be fine.

Yes, Ive got that too, Rightclick -> import from the operationmanager instead of the op,s toollist and it will be right all the way. Problem with that is that your pic of holekordinates are to be done aftervods and for all the operations instead of having that done once for all the imported operations. If the QC want too see that bug clearly, open a big file with alot of operations in several groups and try to import from same file by RC in one new operation toolist. You are going too see alot of operations missing there. /frostfritt

What ever his using, he have a problem with facing in the first post. If you reading more you will se he is rekomended to trim toolpath and even to drow his own. Right recomendation will be dynamic opt if only that problem with cornerradius was solved. 70% stepover look good at screen but bad in the rality with all the cornerspikes and the long uncut ribb att the mid in my rektangular part. I tryed dia 20mm 0.8mm rad today. So now please get this fixed for the next Mu1 and we all can facing dia, rectangular and what ever in all our days. /Frostfritt

Its possible to link 3d and contour 2d, way did they block 2dramp? /Frostfritt

I think there is a problem with dynamic facing. If your mill has a cornerradius it does not clean up all surface. There will be spikes in the corner of the toolpath. Most chipmil have a radius. What do you think of making dynamic facing also handle corner radius mills? /Frostfritt

How to link a contour in 3d to machine it 2d ramping? /Frostfritt

After open .dwg and .ckd multipartsfiles with several layers in X4, the distance between parts are changed. I machine them together so that’s a problem and am not able to move solideparts back again, Have not the solid module. X3 open .dwg fine and dont move things around. X4 forget all the parts colors and make them all green when I open .ckd files. /frostfritt

I make two lines. Then I did a contour toolpath using computer comp. I did scrapped some parts today doing that and I blame the makeline bug I´m going to warn you obout now. try this.. make line. point the first lacation at line. write some length, let´s say 50. press the length button so background become red and length locked. in the graphic area place the mouse near 0, 90, 180 or 270 deg and notise the strait angle symbol from the snapfunktion. point the second location. Now you schould have one line in for example 90 deg angle but no, its for me now 86.82891 deg. What do you think? For me its a bug and it´s the same problem in both X2 and X3. /frostfritt