Tony35
-
Posts
1,154 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Tony35
-
odd i run HPCC all the time for any milling etc (thanks to cnc apps guy1) i never have had an alarm even when ramping might have to tweak some arc tol. parameters in the control just a thought
-
look here
-
i dont have any of those problems with mine....inventor, MC, NC plot smooth as silk do you have a updated driver edit dumb question but do you have support 3D connexion tick box ticked on in config
-
i stopped using a big tolerance (.015+) in the arc filter when in HPCC it was banging the ballscrews to much my filter is set to a total tol. of .001 now or i just use points for SGI on the makinos i have never had any of those alarms
-
BTW welcome to the forum
-
did you update the drivers
-
did windooz update?
-
transform is not supported in machine sim yet
-
did you check the size of the grid? not that your too small or too big? try zoom in /zoom out?
-
-
machine def> control def> arc> use pull down for arc type HTH
-
+1 its not that bad i can see why you have to "sign up" that way just a simple guest or competition cant see what we would like to see as users if you want to see or view the enhancements requests by Emastercammers just PM webby with your sim # and your in
-
mods (might want to move this topic to the "enhancements forum") +1 plus keep it up on a 2nd monitor like the level manager
-
if there was MC 4 inventor i would use it
-
here are some pics
-
hey peeps im using a custom file undefined tool and the backplot shows the tool retracting well when the tool plowed thru the part we found out its not retracting (shows it in cimco backplot) its like its stuck on keep tool down???? so i thought post issue, but when i use a standard endmill it retracts so it has to do with the custom tool i checked all my settings and things look good any ideas on how i can fix this problem TIA
-
Makino A77 Pro3 (Fanuc 16m)-adding memory
Tony35 replied to ?Mark's topic in Machining, Tools, Cutting & Probing
you can always drip feed from a ATA card im looking into adding a data server board for our pro3 still waiting on the quote -
WHAT!!!!! YOU are the programmer, they are the operators they run what YOU program if they dont like it tell em "there is the door and dont let it hit you in the a$$ on your way out"
-
i will pass that along thanks again
-
thanks once again cnc apps guy1 i thought when predator came in to upgrade our dnc that they would know how to set this all up turns out they dont and are looking into how to set it up im just trying to keep the project moving i can see our 2 kitamuras using filezilla now now on to the makinos i know 1 for sure does not have a data server (from your book cnc apps)but has fast ethernet (getting quote for the data server board) the pro5 should have it i hope..... and the saga continues
-
so if i dont have a "data server board" i cant transfer files?
-
thanks cnc apps guy1 i think its the same book im looking at but will look at the one on the FTP site to see if its better
-
+3
-
ok so these are 2 separate things here i will have to do some research inside the machines and see whats going on so if i turn on channel 5 and it tells me "data out of range" then no data server it will let me change to channel 9 so i have a ethernet board? hope this makes sense
-
yes we have the ethernet boards in the machines and data storage so if they wont show up on the network how will predator ever see them then? sorry for all the dumb questions here this is uncharted territory for me thanks for the info cnc apps guy1
