Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
roger
ok i was playing around with the different c-hooks and now multi arc edit wont work
mastercam is only open once, no solids on the screen just some 2d wireframe no restart of computer but i was regen some big toolpaths earlier mcx crashed (slow computer), reopened it and started messing around with the c-hooks and now i get the error
murray
here is what i can tell you so far (my computer is slow still waiting on regen)
i copied the top wcs (work off 0) and gave it a origin of x0 y6.69 z0.0 work offset 1. in translate i set it to between views. i took out the work offsets in the ops the problem is in your post if you look at mi1
(G53=0 G54=1 etc)-not used
it tells you that mi1 is not used i looked for if mi1=1 force wcs in the post and cant find it you need to have work offsets built in i tried one of my posts and i get G54 i'm still waiting to see if i get G55 i hope this makes some sense and as the file ext you are getting i'm lost i dont get that
well mastercam just crashed so i cant tell ya about the G55
in your translate tab how do you have it setup?
between views?
did you try a new wcs for part#2?
if you can zip2go it to me and i will take a quick look at it for ya
murray
are you setting the work offsets in the planes tab?
do you have the work offsets set in the wcs?
check misc interger #9 lock on first wcs?
work offset numbers
-1 G54 default, 0=G54 1=G55 2=G56 etc.
check to see if you have them setup right
HTH
roger
its working for me today. i restarted my computer and started with a fresh mcx session and it works.
when it didnt work i had mcx open 2x. i selected the arcs as prompted when i hit the green ok icon or enter i got the errors. i dont know if its because of the first time using it in the system or lack of memory (i regen some toolpaths earlier) i have the same version of the dll you have and using x3 HTH
there is a feature in wire that will connect the lines for you, if i remember right its auto sync rails. i dont have mcx in front of me but its worth a try. i think what simtech is doing is project a 2d contour to a plane.
i wonder how that solid was drawn up that you have these problems?
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.