cormigu
-
Posts
124 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by cormigu
-
Thx Guys for help me,I figure out my program. it 's work fine. NO.6-32 RH TAP) N1020 G0 T0505 M08 N1030 G18 N1035 N1040 G97 S100 M03 N1050 G0 G54 X0. Z.25 N1060 Z.1 N1070 G99 G1 Z-.255 F0.03125 N1080 M05 N1090 G97 S100 M04 N1100 Z.25 N1110 M05 N1120 G97 S500 M03 N1130 G28 U0. W0. N1140 G00 T0500 N1145 M01
-
Hi Guys, I need to make a 6-32 Tap hole,but I don't know the code line(G code). Please help...
-
----------------------------------------------------------------------- Try this one,it is really good. http://www.calmotion.com/usbcnc.html
-
How can you shift gears when the M03 has already been commanded? Upsss...u right is before to M3.... THX.
-
Hi guys, I have a question,there is any possibility of modify those code in my post processor. I'm using Mcam X5 & MPLFAN Post. thanks.
-
Hi all, is it possible to get geometry from nc file?...I have one nc file but I don't know if this is really possible. thank you.
-
1- SELECT MACHINE TYPE (LATHE IN MY CASE) 2- OPEN MACHINE DEF 3- FROM MACH DEF SELECT & OPEN EDIT THE CONTROL DEF. 4- MACHINE CYCLES - LATHE DRILL CYCLES. 5- UNCHECK CANNED DRILL CYCLE. THAT'S IT.
-
-
I have this issue, could someone help me?
-
=========================================================================== yeah I fix it. thanks guys for help me.
-
=========================================================================== yeah I fix it. thanks guys for help me.
-
I WILL TRY TO USE KEYSEAT CUTTERS.
-
======================================================================================= Try this one:
-
-------------------------------------------------------- I did not think about it,your right CAM-mando is much easy selecting the Inches per thread. thanks again.
-
Hi Guys, I'm trying fix it "CUSTOMIZABLE DRILL CYCLE",please could someone help me how remove it from my post processor or machine def. I'm using mcx5,MPLFAN (modify for lathe mori seiki w/fanuc 10T) thanks guys.
-
Hi, Every one. We have A LATHE MORI SEIKI MACHINE MODEL AL-20 W/CONTROL FANUC 10T. I WANT TO KNOW WHAT POST PROCESSOR DO I NEED TO USE WHIT MASTERCAM X5.PLEASE GIVE ME INFORMATION. THANK YOU FOR YOUR HELP.
-
---------------------------------------------------------------------------------------------------------------------------- You right MotorCityMinion, I was wrong,I did just for an example only. I think Now it's right. thanks guys
-
I was looking for this value,so I don't know really what it is... I put 0.07874 but it doesn't work ,could someone explain to me why 0.07874 doesn't work . thanks ...
-
Thanks a lot John, it works perfectly!!!
-
look like: My link
-
Thanks guys for replay,I'm looking for the formula for Pitch Diameter. thanks a lot for help me.
-
Hi guys, I need to calculate a pitch for M36 X 2MM. Thanks.
-
Hi, Every one. We have SODICK EDM MACHINE MODEL A350 WIRE. I WANT TO KNOW WHAT POST PROCESSOR DO I NEED TO USE WHIT MASTERCAM V9.PLEASE GIVE ME INFORMATION. THANK YOU FOR YOUR HELP.
-
Yeah I did it,but no luck.
-
Hi guys, I have a problem when I create a new WCS coordinate,I don't know why when I select Isometric wcs icon it moves back to the first position & i want it to stay in the second position. any help would be thankful. http://tinypic.com/r/5w8dw/7]View My Video
