Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I am using HST core roughing to rough an Inconel part. My feed is set to 4.8 IPM and my retract is set to 100. IPM.
On the steep/shallow page I am set to .005 for min and max.
The path it is giving me a feed rate retract (4.8) all the way to Z.6301 at every pass.
Is there a switch that I am missing or is this a bug.
Rapid retract is set.
Full vertical retract is set.
Z clearance is set to .125 (not .6301)
Thanks in advance.
I have a puma 240 and I have to slow my feed down to about 10ipm to contour anything on more than a 4in dia. A little better if you go smaller, but not much.
Has anyone been able to do any turning work with B- axis moving on a mill turn machine. I have a deep groove , front wall is straight, back wall is a 45 degree angle that the groover can not get to normal to the od(B at 90). I can rough the groove with 3 tool paths (B at 90,60, and 45), but I want to finish the groove in one motion.
I am running X4
Thanks.
This is my first post.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.