Do a windows search for fonts a mcamx6 common will pop up, open box and drop the unzipped files in there. Thats how i did it atleast.

Got a sample code from supplier and it worked great. thanks guys!

No, I don't. I'm really not sure how all that works. Never dealt with it. Any suggestions?

O yea, I'm using x5 and I'm on a Mitsubishi fa20s

Ok so this is what I'm trying to do, I have a large block that has milled shapes on one side, then in the center of each shape I have a hole in which I want to pick up center on wire, then move to my starting burn hole location and cut this part out. I want to write a program where I can pick up my first hole in the part manually, then the wire will move to x... Y... And cut out my part. After this part is complete and I take it out, I would like the program to move to the next refrence hole and pick up center, then move to the x...y... Value and cut out this part also. I have a lot of parts in these blocks, I just don't want to have to manually pick up each reference hole on each part and start program over. So how can I add in the program to pick up center of a hole automatically then move to x...y...?

ok,will try thanks for the help guys.

When I am wiring out a punch, I am doing 1 rough, leave a tab,reverse path for my skim, then cut tab off. How can i leave a couple thou. to grind off on the tab. I am new to the wiring in mastercam. Thanks

Is there anyway to put a Moo maybe .030 before the slug drops out. I would like to be able to be at the machine as this happens so i can pull the slug out before finishing the cut. I was able to do this in Espree, but not sure how in MC. Thanks

No file, I am just messin around with it, I have always been wonderin how to do it. Figured what better time to learn.

I am trying to create letters on a surface i revolved, I was able to place my letters where i wanted them and project them onto the surface, but i am not sure how to make my letters raided up from the surface. I am wanting to machine the rad. and leave the letters raised about .05. Thanks

Mastercam U is a pretty nice tool for learning, It covers quite a bit of the basics and tool paths in the level one. The advanced mastercam U covers alot of the high speed, and 3d milling apps.

FBM drill worked good to show me my vector lines in diff angled holes, but FBM mill is a waste of time in my opinion.

The hole i am reaming is 4 in. long. I roughed it out with a emill. So i figured reaming would get me within spec easier.

Never heard of these, Any certain brands you would reccomend?

I had used 300 rpm with 3ipm feed. dont care if it took longer just needed good finish.