Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
the older Mcams, you were able to power delete.... press the delete button , press and hold both mouse button and use it like an eraser. plus it had simple sound effects...
yeah i have all my tools labeled, i have always added comments for every toolpath. i have to use subs in all my programming, thats why i do it.... keep everything minimized in the Toolpaths manager, and just quick select those like commented operations and then post....i have used that word document in the past as well.
maybe import operations already with those tools and comments already inputted?
Anyone know a way in the comments section of the toolpath, to have a right-click menu, that allows you to select predetermined comments? for example: 3mm ball rough or .5mm ball finish?
we mainly design electrodes already with overburn subracted from the electrode. this way we cut at zero, leaving tool libraries standard.
on ocassion there are electrodes that cannot be offset in soildworks, then we just subract the overburn from the cutters....it makes all small difference on the geometry, but we like to keep Z zero , at zero.
when you get to the side, just use a endmill about .500 down. skim both ends. then stand it up on a small dowel or ejector pin on the sidemilled surface. then face cut the ends finished.
there are other ways like use a the skim flip turn rotate method, but that is hard to explain in text,
3-4000 rpm, about 20-30 feed rate, .o1 ramp sounds good. can you rough with a square 1/8 em first, down to a depth of .067 ( .130- radius of ball endmill)? going into solid with a ball cutter puts a lot of pressure on it, by roughing first, the ball will have less to go, and less pressure on it. ( air or oil/air mix would be best, but flood water is 2nd choice)
i would always drill small (.030 and smaller) with a .001 (Q) peck, with a .005 (p) rapid return height (G83), with a feed of .5 F
a .024 drill i personally run it at 9200 Rpm. ( will take longer, but yo will not be busting any drills. ( or a hole popper would work too.)
Does anyone know how to get this function to work correctly?
V9 was so easy to use this function, just pick your operations, and click highfeed, only drawback was it locked your toolpaths and required regeneration for any simple changes.
I have played with this feature in the past in X4, but it always applied the highfeed to all operations without me selecting them, which gets annoying.
To me this is not user friendly. I am sure this has been a complaint before, i just need some help in telling where i should look.
thanks,
Todd
X5 Mill level 3
X5 solids
X5 5-axis
I was wondering if you know of a fix to my problem. After I select geometry for a toolpath (doesn’t matter what type, surface, 2d) it takes a very long time for the parameters page to pop up. Sometimes 30 seconds to a minute. It has been getting progressively worse from X2 thru X4. This is very annoying. It also does the same thing after a toolpath is complete, and you try to edit the parameters, it will take 30 seconds to a minute to open up.
Mastercam X4 design, Solids, 5 axis machining.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.