Click on screen at the top of the screen.Then click copy image to clipboard.

I installed X3 a few moths ago and have been useing it for all new jobs. I started getting an error mesage (file does not exist)when selecting toolpaths also blank a tool libary. I must have done something wrong because it worked when first installed. Should I just delete X3 and reinstall? thanks for any advice Tony

With filtering off and SGI on (Makino) the file size of the programs is about 5x larger than the filtered TP. The Mazak definitely runs better with filtered tool paths. No not a fair comapison. 15 yr. old mazak to a new Makino.

Since the customer is OK with the difference I don't want to/can't take the time to reprogram. Just thought it was interesting how the same toolpaths in two differtent machines could be so different.

I think it does have to do with the feed rate. The makino slows down on it's own. They want it done ASAP. The mazak has an older controller and 1/4 spindle speed.

I'm cutting two alum. cores, same part, on 2 differt machines. One is a Makino S56 the other a mazak VTC 16-A. The parts on the makino are coming out in sharper detail. Picture a piece of slate. The steps between the layers and edges have a more rounded look on the parts coming off the mazak. The toolpath are the same except the filter on the makino toolpaths is turned off since the machine doesn't use arcs filter settings on the mazak set to 2:1/0.001. The customer is OK with the difference since it's the inside of the part and won't be seen. I'm just wondering what it would take to get them to look the same. Maybe a thighter filter setting. thanks Tony

If you look in the config settings under the start and exit option. You'll see a drop down menu under start up product. Ther you can select mill or design.

The surface parameters tab. To the right of regen. It's grayed out untill you click on the check box. Open the dilog box and you'll see plunge and retract options. If you experiment with those options you should be able to get a lead in lead out that will work. glad I could help Tony

larry can you extend the surface you want to cut? Or add a surface to the ends of the part to act as a lead in. Also have you tried the direction option on the surface peramiters page?

Any of you Makino users know anything about this software. It was developed by Makino and emSolve. Just looking for info./opinions. thanks Tony

Got it now thanks. On the test cut I did pick just a created point and the second time an arc. thanks for the help

I tried useing a point and it grayed out. I wanted too be able to alter the dia. to get the right fit for a pipe plug. Only arcs for the inside dia. of the hole and the champfer were drawn in not the major dia. whitch is what the TP cuts to.

Does anyone know why the Major thread dia. Dialog box grays out when selecting points or arcs? I used this tool path for the first time yesterday. I cut three 1/8-27 NPT test holes first. When I was satisfied with the size,lead in lead out I cut the cavity block only to have the hole finish too large. When I checked the toolpath in my ops. manager I saw that the thread dia. box was grayed out. I tried picking on the hole dia. a point in the center with the same results. Why it work the first time I don't know. I got it to work by creating a line through the hole and selecting it's midpoint. Has anyone had this problem with thread milling or am I doing something wrong? thanks Tony

stevieboy Xform offset contour

Code Breaker You can also try Micro Cut 866 426 3300 in MA