SCOTT.R
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by SCOTT.R
-
As a former smoker I don't miss the days when I could smoke in the shop. My old boss used to smoke like 3 packs a day and he always threw his butts in the chip barrels. Sometimes I swear there were more butts then chips. The barrels stunk so bad that when you emptied them it made you want to throw up...
-
Ok I got it. It seems the only way to get a program in is to have no extension. The only way i could save it without a extension was to save a program already in the Haas control to the floppy then I brought it to the computer overwrote the file with my new file and then loaded it into the Haas. There has to be another way?
-
Can't figure out how to save it without a extension on cimco but I remember doing it that way when I used surfcam at another place.
-
.nc dosent work . Neither is .txt for some reason. Not sure what im doing wrong...
-
Its a 2004 model. New to me.
-
See I knew it was something easy like that. Thanks Mic6
-
Well we just got a new Haas mill here and I am trying to get a program to it through the disk drive. I can't remember what the program extension should be for a Haas. Should it be like O1.nc ? I tried it but that didnt work. Not sure what to save it as any help would be apreciated. Thanks, Scott
-
Ok what is this raster to vector thing and why is the info on mastercam help so vague about it? I assume when you open a file in Mastercam you have to open it differently? I can,t seem to find anything about this and it would be cool to play around with for my own personel stuff. Do you need the art package for mastercam to use this?
-
If its a closed contour make sure you dont have the enter/exit at midpoint checked in your lead in/out page. That has got me a few times when i tried to move my start points..
-
Sorry everyone I haven't had time to check back on the forums. I dont mind if you post my file up here. I still need to figure out how to post files on here so I will leave it to Dave if he wants to take the time to do it.Thanks again for your help Dave.
-
No problem i am leaving here in a few minutes anyway. Idiots are sandblasting in the shop and i dont want to breath this silica sand.
-
Thanks Dave i just sent you a email.
-
i was wondering if there was any way to post to run multiple parts with different work offsets with out going into the posted program and copy/pasting the gcode for multiple parts? Usually i am running 1-2 parts but on those times i do run more it would be nice to not have to edit the program everytime i need to change something. Thanks for any help in advance..
-
Minimum Bounding Box/Hole Axis
SCOTT.R replied to Verisurf - Ernie Husted's topic in Industrial Forum
Do you have to have bought something from verisurf to use this or what? I downloaded it and tried useing some of the chooks but it asked for a access code. -
I have the same problem. I am also running X4 MU3 with windows XP.
-
How do you open the X+ setup sheet? Havent really messed around with the setup sheets yet because i setup and run all my programs myself and if i dont know what im doing after programming it im in big trouble. =)
-
Totally agree with you Dave. I always say if i didnt learn something new today it was a wasted day..