Slick, If it's not to much trouble i'd like 1 to.

motty; Yes i work in detroit for a auto supplier.

Chris; sorry about the echo. The network around here is screwed up and i can't get back on to see what comes through to the message board and what doesn't sometimes. Jim; thanks for the help. It worked. I'm sure I'll have more questions in the near future. Dan

I checked my post like mark suggested and it is set to yes. And as for asking for $25.00 for a post disk like jack suggested, I might as well be asking for 1,000,000. I'll have to get back with our m/c dealer and see what he comes up with. Thanks for the help. Dan

I checked my post like mark suggested and it is set to yes. And as for asking for $25.00 for a post disk like jack suggested, I might as well be asking for 1,000,000. I'll have to get back with our m/c dealer and see what he comes up with. Thanks for the help. Dan

I checked my post like mark suggested and it is set to yes. And as for asking for $25.00 for a post disk like jack suggested, I might as well be asking for 1,000,000. I'll have to get back with our m/c dealer and see what he comes up with. Thanks for the help. Dan

I got a post for our mazak integrex with a t32-3 controller from our m/c dealer and it needs some help. could someone tell me how to get rid of the information on the far right? N101 G18 G53 lsof ltlchg 56 M302 lsof pg50call 56 G28 Y0. lsof pg50call 56 G28 U0. W0. lsof pg50call 56 M202 lsof pcaxis_off_l 56 T0101.00 B1 lsof ltlchg 56 G97 S132 M3 lsof p__15:1324 56 G0 X6.3875 Z0. M8 lsof ltlchg 56 G50 S3600 lsof pcssg50 56 G96 S220 M3 lsof pcss 56 G99 G1 X-.0625 F.012 llin plinout 58 G0 Z.1 lrapid prapidout 60 M9 ptoolend pg50call_ret 64 G28 U0. Y0. ptoolend pg50call_ret 64 G28 W0. ptoolend pg50call_ret 64 M5 ptoolend pg50call_ret 64 M01 ptoolend pg50call_ret 64 any help will be appriciated. Thanx in advance. Dan

Hi All I'm in desperate need of a post for a mazak intergrex 40-atc m/c. it has a t32-t controller on it. The problem i am having is i can't filter down a program using the c-axsis. The controller don't have enough memory to run this program and the boss don't want to drip feed it because the dnc is setup through a wirless network and he is afraid it might pick up interferance. If anyone could help i would appreciate it. thanks in advance.

Thanx for your help this will give me somthing new to play with

Thanx Jerry, I guess what i need to know is how do i save a previously used job setup?

Hi All I am new to the forum and have been reading alot of the threads. I wish i know this was here when i first started using mc. It's been very educational. The question i have is in my job setup there is a toggle to import a setup. i have no idea of how to save a setup or anything of that nature. I am sure mc can be used more efficently than how i am using it since i am self taught. any help will be appreciated. Thanx in advance. Dan

Sorry about that, Yes i try picking the edges in the opposite order.

I have just started working with solids but it seems to me that when i get this error i am selecting my fillets in the wrong order. I dont make since to me but it works.

thanx for the help.

We currently started working off models created from UG. I am converting them from a parasolid. What i was wondering, Is there a way I can alter a model that is sent to me or do i have to add geometry to it. I know if I create a model I can do this Through Analize and Edit. But that dont seem to work with the models I am receiving.