Doug Gabbey
-
Posts
130 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Doug Gabbey
-
What brand of mouse are you using. I bought a Logitech VX nano and it caanot rotat in MCAM or SolidWorks. (Per customer service) That will be the last Logitech product I will buy! Doug
-
Be careful what you buy, I bought a Logitech vx nano and it won't scroll in Mastercam or in Solidworks. I had no trouble with Microsoft mice. Doug
-
Mouse scrolling in Vista/X3 MU1
Doug Gabbey replied to Josh @ Pegasus NorthWest's topic in Industrial Forum
Has anyone got a Logitech VX Nano to scroll in Mastercam or solidworks? -
Check that your planes are set correctly for that tool
-
Kevin, I found that NOT setting the t/construction planes correctly at the start of the op generated this error. Once the planes were set correctly it went away. Doug
-
This is obviously a Senior Citizen thread. I am still using my 1984 HP41CV (about $220. then) Doug
-
John, Reopen was already unchecked. Steve, I renamed it to CimcoEdit.exe and renamed the old MR1 installation and now it seems to be working OK. Thanks again to everyone for their help. Best regards, Doug
-
Thanks Ernie. Doug
-
When I open the nc file it also opens the Cimco exe file in the editor. It opens both files for editing at the same time!!!!! The nc file is "opened" ready to edit but the cimco exe file is there as a tab and I can click on it to edit it or I can right click and close it leaving the nc file open. Needless to say, I do not attempt to edit the cimco file. I hope this is clear now. Best regards, Doug
-
Ron, I am using the stripped down one. Best regards, Doug
-
When I open an NC file to edit in x2 mr2 cimco_edit5it also opens the Cimco exe file. Anyone else seen this? Best regards, Doug
-
Shawn, I have had this error when the tool or construction plane was not correct. Doug
-
John Summers, Thanks, that email comes to me. Jay, Every time I think I have cracked the WCS/plane thing I get a new puzzle, but it is going OK. Best regards to all, Doug
-
John Paris, I expected it to work that way but will try again tomorrow. John Summers, How do I get the camshaft utility? Thanks to both of you. Best regards, Doug
-
I want to create a series of planes at 45 deg increments round a camshaft c/line. I can get to A180. by rotating the A0 plane but when I try for A225 it does not create A225 and show A135 on the screen. Any tips on the best way to do this would be much appreciated Doug
-
GCODE, That worked too. I never even thought that one could untrim a surface created from the solid like that. I don't know if I am any smarter today but I am wiser. Thanks again. Best regards, Doug
-
John, I was going to try that next if there was no better way. Ron, I forgot to mention that the part is a solid from a step file. I was able to use your information after I created surfaces inside the holes (from the solid). If I am missing something about using the solid let me know. Once again thanks to both of you for your endless sharing of your valuable experience.
-
I have a shaft with holes at various angles, but all perpendicular to the center line. I want to drill them on a 4 axis machine. Any hints on how to generate the hole axis. I don't think Verisurf's prog works as I have no circles to select due to the curved surfaces (Diameters) on the part. Any help or guidance would be appreciated. Best regards, Doug Gabbey
-
Check with your dealer. I was sent last year's codes for renewal 3 days ago. Doug
-
Snehal, Thanks for taking the time to help. That worked out for me. I am printing this out for future ref!!! Best regards, Doug
-
BUMP
-
When I rotate a mill operation I generally don't want to output a new G55 G56 etc. Is there some way to set the default to prevent this? I am at home and can't remember the exact wording but there are 3 choices at the bottom right of the first? page.
-
Hurry back Chris. Doug
-
Sponsored Links Jay?, I found this by googling catia+c18 It found many references to "cracked software" also. Hope this helps. Doug [PDF] CAGE CODE 81205 THIS DOCUMENT IS CONTROLLED BY PREPARED UNDER ...File Format: PDF/Adobe Acrobat - View as HTML C18. C20. Binary. CATIA data. in CATEXP. EXPORT. format. Seattle/Wichita. CATIA. CATIA Project Files. are not synched with. the trading partner. ... www.boeing.com/companyoffices/doingbiz/tdi/user_guide.pdf - Similar pages
-
try picking the other end of the line for hole axis or center. Doug