fboike
-
Posts
79 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by fboike
-
Rekd, If you added catia, Pro E and hypermill you would have my list. but I can remember when the only tools a programmer had were a calculater,a pad of paper and a tape punch. So you of all people should understand the learning curve and all the frustration that goes with producing the most effeicent programs for your operaters. Be thankful for all the tools, It was pure hell without them. I know from experiance. Tolerance always gets better results then intolerance.
-
James, for what it matters that IP is from Amsterdam and is a dynamic address. Releasing a trojan to the internet makes you no better then the person who posts cracked software. I would have hoped for better from a knowledgable person such as yourself. [ 03-17-2003, 09:27 AM: Message edited by: fboike ]
-
Well said Drew, As a new member to this forum myself, I have been reading posts for a couple of months. Ive seen a few members pile on to a question they deem unworthy or have a problem with. (Ther are no stupid questions, only stupid answers) Ive been using mastercam since V6 and many times found resellers either unwilling or unable to help. But tech support at cnc software has always been great. Tell Cherokee Chief to stick with it. We regularly push the extremes with mastercam and our machine tools. and mastercam has proved itself to be the most useful tool.
-
G80 only cancels the canned cycle, it doesnt cause movement, you need to add a Z move after the G80s to bring the tool to inital point. (G00 Z1.00)