-
Posts
179 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by AlbertZini
-
-
Set the I/O channel to 17
I did it, I see the program on usbmem but I can not enter them,when I do input programm the bottom right corner, I see the "input"but programs do not enter to cncmem -
Can somebody tell how to enter the program from the usb flash card in cnc machine Fanuc 0MD
Program are displayed but I can not enter into the machine
-
3d model Mini Mill Haas & Haas vf1
https://grabcad.com/library?page=3&time=all_time&sort=recent&query=Haas
- 1
-
Hello everyone! Have tool - Taegutec dxf files? where I can download them, I need Taegutec TFM43OFS 780-27R-05
- 1
-
Thanks for the help Mhoppe, tomorrow I will test the machine. CIMCO shows as it should
-
Somebody can help - create a calculation step to Z -circle mil
% O8888(CIRCLE MILL) #1=15 (# TOOL) #2=1500 (S TOOL) #3=500. (F FEED) #4=20. (DIA. HOLE) #5=0. (X) #6=0. (Y) #7=2. (RETRACT) #8=0. (Z START) #9=-10. (Z END) #29=#8+#7 #30=[#4/2]*[-1] (-R HOLE) #31=#4/2 (+R HOLE) #32=#3/2 (PLUGE FEED) G21 G0 G17 G40 G49 G80 G90 T#1 M6 G0 G90 G54 X#5 Y#6 S#2 M3 G43 H#1 Z#29 G1 Z#8 F#32 G41 D#1 Y#31 F#3 G3 Y#30 Z-.5 I0. J#30 Y#31 Z-1. I0. J#31 Y#30 Z-1.5 I0. J#30 Y#31 Z-2. I0. J#31 Y#30 Z-2.5 I0. J#30 Y#31 Z-3. I0. J#31 Y#30 Z-3.5 I0. J#30 Y#31 Z-4. I0. J#31 Y#30 Z-4.5 I0. J#30 Y#31 Z-5. I0. J#31 Y#30 Z-5.5 I0. J#30 Y#31 Z-6. I0. J#31 Y#30 Z-6.5 I0. J#30 Y#31 Z-7. I0. J#31 Y#30 Z-7.5 I0. J#30 Y#31 Z-8. I0. J#31 Y#30 Z-8.5 I0. J#30 Y#31 Z-9. I0. J#31 Y#30 Z-9.5 I0. J#30 Y#31 Z-10. I0. J#31 Y#30 I0. J#30 Y#31 I0. J#31 G1 G40 Y#6 G0 Z#29 M5 G91 G28 Z0. G28 Y0. M30 %
-
@gcode I mean only rotates toolpath - surface, line, solidmodel not rotate
-
Why in X8 simulation axis rotation occurs without model ?
-
-
You can still try the standard Active Reports(setup sheet) & mill.set
-
Create cycle time in the NC file,using the postprocessor http://www.emastercam.com/board/topic/74520-cycle-time/?p=874448
-
Thank you Greg for answer
-
-
-
Yo need ---------------
tool_info : 0 #Output tooltable information?
#0 = Off - Do not output any tool comments or tooltable
#1 = Tool comments only
#2 = Tooltable in header - no tool comments at T/C
#3 = Tooltable in header - with tool comments at T/C
tlchg_home : yes$ #Zero return X and Y axis prior to tool change?
In pretract delete "X0."
And add in pheader$ # as said JMC
-
See how it work in mpmaster in misc reals #1 3=HPCC
http://www.emastercam.com/board/index.php?app=downloads&showfile=622
-
It would be nice to see it on the basis 1_3AXGEN_VMC and Generic Fanuc 3X Mill.pst how use sim code
- 1
-
For the multiaxis - use only 4 axis for programming in Mastercam.
If you do this in the postprocessor, the part geometry will be wrong
In the postprocessor can do this only for indexing
-
There is a video that was done on how to build a machine for Mach Sim but it wasnt an official video so it couldnt be released i will see if i can locate
it on the web. You can also use Mach Sim with any machine just by choosing the 5AxHeadHead and that does not load a machine, just the tool, holder and workpeice and fixtures. if it is a 3-axis file, the head is locked and it will only move the live axis'.
Earlier the video was on youtube "Building a virtual machine for simulation - Karlo Аpro", then they deleted it...
-
AXIS SUBSTITUTION - ROLL THE GEOMETRY
-
http://gmccs.de/?page=downloads.php&dl_grp=8&pt=X% 2B + Инструмент и загрузка
-
How long does this impeller manufactured ?
-
-
Dynamic milling x8
in Industrial Forum
Posted
http://www.inhousesolutions.com/training/webinars/