Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
SOo I am set up my angle head in my mashie deff
when I oposting code looks like is something wrong ,the ,how I can change Y to Z?
HMC SAMPLE.MCAM-CONTENT
Hello
We try set up a aure HMC with tosnuc 732 control, when I load the program I start running, the alarm show up
Anybody can help what is the problem ?
Hello All ,how I can pick up holes only on my blue face ,when I use ctrl shift mastercam pick up all the same holes on on my front face what I am working and on the back face .
thanks for any helps
I can use the 3d toolpath for finish from the small holes side ,but the will be very hard use sime enmill for other side ,I need over 6 inch long enmill
I am still didnt see this
ok ,I think I see some flats on my stock is beacos I am make to deep 3 inch hole on my lathe on face
thats why I have problem for blend it all together
can you run your toolpath on my stock for blend oper ?
I don't know how I can explain this to you
I have this mdel from the costumer .So my plan was to set up this for lathe ,turn od and make face bore 1st .So after that I am creating working plan from the center line of side bore and I am use helix toolpath for rough .When I am make veryfy I see the I I can't go all to the bottom becose I will hits in the wall of the face bore ,
So ,I am create other operation and working plane and try use some rough 3d toopkath and 3 finish ,but I don't know haw I can finish this with rhe same results what solid
For me this is not doable
Can some one can help me on this sample , I am open old program ,the other program marck one hole and rotate toolpath around x
I am try ise 5 axis drilling marck all holes but do not work ,
4 TH AXIS DRILLING.MCAM-CONTENT
ok ,got it
Hello All
I need to find out what happen on my VTL set up .Yesterday when I am start program part all roll over on my X value ,
This is my set up Vtl see pic
Till yesterday everything working fine my post posting positive x value like as should , today I am start mastercam and all x axis are negative ,even when I am open my old good programs the axis are now wrong .I am use generic VTL post and machine deff from mastercam web .
This my code ,all X are negative
(TOOL - 3 OFFSET - 3)
(RIGHT TURRET - 80 DEG. INSERT - CNMG-432)
(FACE)
G0 T0303
G18
M8
G97 S50 M03
G0 G54 X-30.31 Z.1
G50 S200
G96 S400
G99 G1 Z0. F.015
X-26.81
X-26.9514 Z.0707
M9
G28 W0. M05
T0300
M01
(TOOL - 3 OFFSET - 3)
(RIGHT TURRET - 80 DEG. INSERT - CNMG-432)
(OD CHAMFER)
G0 T0303
G18
M8
G97 S52 M03
G0 G54 X-29.2796 Z.1969
G50 S200
G96 S400
G1 Z.0969 F.015
X-30.416 Z-.4713
X-30.5574 Z-.4006
M9
G28 W0. M05
T0300
M01
what I am doing wrong ,did I am change something ????
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.