Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
HELLO EVERYONE !!!!
I want to use One of the surface high speed tollpath for my part . material is ss 304 .I want to use .5 DIA carbide enmill full depp (1 inch high part).
which will be the best??? what step over and feed and speed I should???
Thank you for any ideas
Hello everyone!!!!
Did any of you may can advise what toolpat ( tool) choose to make this plate ???
I am looking for the best way cut SS material .what is the most effective???
I have a .125 stock on width and length around the contour.
THANKS
I a deal With COSTOMER , and , I can use 5/8 ENMILL in the corners Is not it better to use the full deep and change toolpath on MULTI PASSES?????
"
Also, I programmed a linear feed of 29 IPM, but the feed output in the code is F2000. for the cutting moves with the C axis"
WHAT ABOUT THIS , QUESTION BECAUSE SOMETIMES RUNS 4 AXIS IN AND HAVE THE SAME PROBLEM???
most problems i have with roughing teeth after welding ,I tried to use the .5 carbide finish enmill and i make 2 pcs .after rough i cut all contour i use .75 sumitomo insert emill ramping contour .025 step dawn .1500 rpm and 75 ipm .for rough teeth .5 carbide finish 2500rpm and 90 ipm and .01 step dawn .
HELLO EVERYONE!!!!!
I have same knifes to machining all contour ,same places was re welded and is very hard .All part is over 40 HR. To Finishing teeth I can not use the tools greater than 3/4 .I tried carbides ,high speed toolpath and after 2nd part the endmill was dull.Do you have any ideas??? Part has a 2 inch thickness
Thank you for any clues
45-45-02.mcx-8
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.