ok ,I can try this ,but when I open my shared folder my machine is there when I am do the same thing from 2024 is nothing there

2024 update some what I am not use any more (***like those x9 **)but not not this what I want to use now What I need tot do ,I need to manual select folder off mcx 20203

Hello All. I am use Migration Wizard to covert my all file from from 23 to 24 mastercam ,on 24 mastercam dont shows all off my machines ,how I can fix this this is 2023 folder I do not has this machine in 2024 folder looks like I am not has half off the machines on 2024

I do not have dynamic work offset on my machines ,I know some people use sample macro calculation ,but I am never try it .

I use tooling balls...if I have a tombstone that will need to have angles picked up I make sure I add a toolball location that I can easily reference. I dont understand ,can you posting some video ?

Hello all ,I hope I can explain my question I am program HMC ,one part only ,the was 2 operation on it . On lest operation I want to make side hole ,so this is my front plane and part view I want to rotate my table 75 deg and drill port like this Can I use this number for calculation new X and Z position ? How I can calculate this numbers ?I am not programing from center of rotation so I was wondering there is some method ? for now I do like this Rotate table ,Y will be the same and I can take point from right edge I thing I has to find out center of table rotation ,did I am write ?

I am use solid from level 1 and mastercam shows solid what I am not selected

I am try my stsl one more time and rename and work now

Hello All I am create my stock from stl .file and when I am veryfy looks like stock is empty inside ,how I can fix this ? thank you

Thank you Ron for reply ,this not stock model ,this is my toolpath calcualtion

What I can do when mastercam calculate toolapth and stock and wont go thru and I cant stop my operation ? my sample ,stock on 81 % like this and when I want to stop it it is freeze least 45 minutes like this

Hello ,how activate chaining similar option on mastercam 2024 ?

Thank you I will try this

Yes ,that is what I looking for ,thank you Ron

I do no see it anything hehe

HELLO , I am start play on mc 2024 ,haw I can fixing the quality my verify ? also ,how I can get this bare set up default for high quality ? thank you

I am find this in my post # -------------------------------------------------------------------------- # Motion NC output # -------------------------------------------------------------------------- ptool_insp #Tool inspection point #Modify following lines to customize output for tool inspection points if posttype$ = two, #Lathe tool inspection point [ pcool_off #Coolant off before tool inspection pbld, n$, pnullstop, e$ pbld, n$, scoolant, e$ if prmcode$ = 29999, #Only output tool insp comment if one was entered with this insp point [ sparameter$ = ucase(sparameter$) pbld, n$, *sm00, sopen_prn, sparameter$, sclose_prn, e$ ] else, pbld, n$, *sm00, "(INSPECT TOOL)", e$ #Output just the stop if no comment pbld, n$, *sgcode, *toolno, e$ #Restate tool number pbld, n$, pfsgplane, #Restate plane code if css_actv$, #Restart Spindle [ if css_start_rpm, prpm, pcssg50, pcss #Direct RPM startup for programmed CSS else, pcssg50, pcss #NO RPM start - just output the CSS ] else, prpm #Direct RPM was programmed result = force(feed) #Force output of feed next time it's called for output prv_gcode$ = c9k prv_workofs$ = c9k pinsp_cool_on #Coolant on after tool inspection pbld, n$, scoolant, e$ ] else,#Mill tool inspection point [ pcool_off #Coolant off before tool inspection pbld, n$, scoolant, e$ pbld, n$, pnullstop, e$ pbld, n$, sm00,"(CAUTION POST GENERATING MOTION FOR TOOL INSPECTION)", e$ pbld, n$, *sg28ref, "U0.", [if y_axis_mch, "V0."], "W0.", e$ pbld, n$, sm00, "(INSPECT TOOL)", e$ pbld, n$, *sgcode, *toolno, e$ #Restate tool number pbld, n$, pfsgplane, e$ #Restate plane code pspindle prpm #Restart Spindle pinsp_cool_on #Coolant on after tool inspection pbld, n$, scoolant, e$ pbld, n$, *sgcode, pwcs, pfxout, [if y_axis_mch, pfyout], pfzout, e$ ] prapidout #Output to NC, linear movement - rapid if lathecc = zero, [ if millcc_flag & (abs(cuttype) = four | abs(cuttype) = two) & cutpos2$ = zero, #Polar interpolation is active & Y-axis subs or Right face or Left face & before start point of operation geometry [ if abs(cuttype) = four, #Y-axis substitution, output C first on separate line [ pcan1, pbld, n$, pexct, psgcode, pcout, e$ pbld, n$, pexct, pxout, pyout, pzout, pscool, strcantext, e$ ] else, #Right or Left face cut, output Z last on separate line [ pcan1, pbld, n$, pexct, psgcode, pxout, pyout, pcout, pscool, strcantext, e$ pbld, n$, pexct, psgcode, pzout, e$ ] ] else, [ pcan1, pbld, n$, psgplane, pexct, psgcode, psccomp, pwcs, pxout, pyout, pzout, pcout, pscool, strcantext, e$ ] ] else, #Lathe canned turning cycle [ pcan1, pbld, n$, pexct, psgcode, psccomp, pxout, pyout, pzout, pcout, pscool, strcantext, e$ ] if force_feed, result = force(feed) # Force output of feed next time it's called for output if rpd_typ$ = 7, ptool_insp #Tool inspection point plinout #Output to NC, linear movement - feed pcan1, pbld, n$, psgplane, sgfeed, pexct, psgcode, psccomp, pwcs, pxout, pyout, pzout, pcout, pfr, pscool, strcantext, e$ if rpd_typ$ = 7, ptool_insp #Tool inspection point pcirout #Output to NC, circular interpolation pcan1, pbld, n$, psgplane, sgfeed, pexct, psgcode, psccomp, pxout, pyout, pzout, pcout, parc, pfr, pscool, strcantext, e$

I hope I can get only .00001% your knowledge

np did you know how off this higlits solid option ? I am try this seeting and didnt work

Try change path tolerance and toolshape tolerance on bigger

so this work the same way in lathe post ? I can find this in my lathe post pbld, *pfn, *t$, "M6",e$

try this

yes something like this

I am sorry ,I am just play on 2024 2nd day I have to find out by self

I like to get N block every operation