I HAVE PROBLEM TO DO SOLID ON MASTERCAM . Is there someone who could help me?????

SOMETHING LIKE THAT???

DONE BUT I DO NOT KNOW WHAT'S NEXT

THE MINOR DIA??? THE SAME PICH ????

THIS IS MY FIRST TRY

OK , ALL CLEAR BUT AFTER WEN I DONE CREATE HELIX TOGETHER,, WHICH SHAPE SWEEP ?????EVERYONE IS DIFFERENT

DO YOU MAKE HELIX FROM POINT TO POINT OR YOU Draw INDIVIDUALLY AND TRANSLATE ???

I HAVE BIG TOLERANCE I CAN DO THROUGH DWG ,

OK NOT run on DWG ,I changed it to MC

IT WOULD BE WONDERFUL Can I send EMAIL TO YOU ????? I CANT ATTACH NEXT FILE IN THIS POST

IF I HAVE 2D DWG FILE I CAN TAKE SOMEHOW PICH THEREFROM ???

HELLO ALL!!!! I WORKS OF PLACE,WHERE ENGINEER DRAWS ONLY 2D PARTS .IF I NEED SOME SOLID FOR MY PROGRAMS ,I MAKE MY SELF . MY QUESTION IS CAN I DO THIS SOLID ON MASTERCAM ???If so, you have any ideas??? THANKS FOR ANY HELP

try the PERPENDICULAR LEAD IN/OUT

Thank you gentlemen for your reply, Jim I tried to make an appointment with my dealer to have any training multi axis but their answer was with at the time they did not offer any classes,if I need help they come to shop,but i would like to have some basis , I asked for a book , I hope that I send to me.

I hope that my part will be click,click,bam .I do not have much experience on multi axis I do not know how to control it all

yes, link settings , and one more question . the tool entering me almost in the part ,how to make longer lad in /out ????

Hello all!!! I use morph between 2 curves multi axis toolpath for finish radius on top of my part ,and on and in the middle of the operation It shows me collisions part . if someone can help me set lead in /out ,or maybe it's a different setting ????? Thank you for help

or how to use the axis substitution for match with my solid >>>>

what multi axis toolpath I can use for rough this part ??? I start xfromm roll and next axis substituton function but does not match to my solid Thank you for any ideas 201019.mcx-9

why you machining this way ,vertically you can make 10 times faster ???

JAWI11 WELCOME TO THE CLUB,I HAVE THE SAME PROBLEM , I would like to start doing something on 5 axis but I can not find any good videos or books .My re seller said that maybe will help me in the shop working with my on part ,but for now we do not have any typical job for 5 axis ,and the second problem is that we do not have purchased a license for 5 axis.I can not say to the boss , To close all shop just for me buy licenses because i wants to call for my reseller and play on 5 axis part .I think I stuck , and when I have something on indexer running on I , rotate and use surfaces toolpath

I WAITING FOR EMAIL FROM THEM ALL DAY AND NOTHING.TIME CHANGE RESELLER THANKS

Hi everyone!!!! can anyone help me with my postproprocesor, I would like to change a few things N14 ( LTR. Y CARBIDE DRILL T14 , D14 , H14 , ACT DIA.= .404 )G0 G90 G54 X-1.3756 Y5.1339 S2250 M3G43 H14 Z2.M88G98 G81 Z-2.0718 R.1 F14.X1.3756 Y-5.1339G0M9M5G91 G28 Z0.G28 Y0.M30 1.I would like to have speed in the next line 2.does not generate me M89 a s it should be and coolent M89 have in earlier line AS BELOW: G0 G90 G54 X-1.3756 Y5.1339S2250 M3G43 H14 Z2.M88G98 G81 Z-2.0718 R.1 F14.X1.3756 Y-5.1339G0 Z2. M89M5G91 G28 Z0.G28 Y0.M30 THANK YOU FOR ALL ANSWERS

4/25.4 THIS IS YOURS PITCH AND WHAT TOOL YOU WONT TO USE 1 POINT OR MULTI POINTER ????SET THE DEEP AND DONE

THIS IS POST FOR HAAS ,AND THIS IS ONLY SAMPLE OF TOOLPATH