Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Re-installed this morning and everything is good so far.
Since I will not be using the migration tool this time. What files should I use the update folder for and what should I stay away from?
So is my only fix here to do the uninstall and not do the migration?
Sounds like this should be a warning to all NOT to do the migration!
I was just following the transition guide.......
Hello all!
Just installed X7 and when I try to verify I get an error. Did a search and i didn't see my error in any of the other threads.
Any ideas?
Mike
Hi all
I use F12 (hardcopy) to print the screen for all of my setup sheets. I moved on to X6 this week and I'm having some issues with printing the screen.
See in attached images the differance. Note both files have all the same levels and shading on. When I print in X6 everything prints out shaded.
In X5 This was not an issue. I would like the result to come out like X5. Much less printer ink and a cleanner look.
Let me know any ideas
Thanks
Mike
Hi All
I am totaly new to Horizontal machining. We are getting a new Mori NHX4000 with a MAPPS IV control (I know nothing about this control).
This will be a single pallet changer with future palns to add CPP system.
List of options we are getting:
1: 120 tool capicity
2: Full 4th axis rotary table
3: Through spindle coolant
4: Optical spindle touch sensor (Renishaw)
5: Table touch sensor (Metrol)
6: SSS control (Not sure what this is yet)
Can you guys tell me some must haves or any other info your willing to share? And also do I go to my reseller for a post or do we try and get one with the purchase of the machine?
Look forward to hearing your thoughts
Thanks
Mike
Hi all!
I am running a job that has a sub call to the flash card (m198). Is there a parameter that I need to address to get the machine to run at my programmed feedrate?
The toolpath that is running off of the card is maxing out at 30IPM.
fanuc 31i control using G5.1
Thnaks for taking a look!
Mike
Hi All
Came upon an isuue today. When I double click in a cell to change a value the minus sign will not highlight.
I can drag across the value I want to change and all is fine but I'm used to double clicking.
Take a look at the attachment.
Anyone else see this?
Ok got it working!
IT guy plugged in wrong port!
Thanks again for all the reply's
Stayed with default settings:
stop bit 2
data bits 7
parity: even
baud rate 4800
nothing in the triggers
Thanks all for the reply's.....no luck yet....
I put a % sign at the beginning of my program and added it to the trigger. Still no luck.
My post does not put a % sign at the beginning of my programs so I'm not sure that is my problem.
And before I swithed to this new PC i did not have any problems...
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.