Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
No, but I've priced it in the past. I'm about 2.5hrs north for them and I now own the shop so I get constant interruptions so it never really works that well. I know I'm paying them for there time but to have to keep getting up and leaving for 5-min is a waste of there time.
I need to get a book or online training to get more up to speed with our haas trunnion. I have been doing a decent job with 3+2 but need
some crash coarse full 5axis stuff. I have had some help from reseller in the past but I get pulled away so much I need something I can referance back to. Is the books from this site the best or go with an eaprentice course like the one Jay has on there.
opinions wanted.
I iwish if I forgot to uncheck multi passes it would give me the warning without completely blowing away the toolpath and having to make all my changes to the op all over again.
Unistall and reinstall software after trying fifo buffer and different cable. I don't know if it was the reinstall or the restart but it made it through the run. I will check last two options individually next round but I was running out of time on this one. thanks again
cimco to dnc
38400 baud
about 10' cable
window xp comp
Its wireless but I even tried saving the program local with same result.
I am gonna go switch a cable now
I have one mill here that "sometimes" (alot to today) will just run out of code on a dnc drip. Has anyone had this? I am not sure if the machine is forgetting to ask for more code or computer is failing to send. We have three machines all with the same dnc settings, and this is only problem child. any thoughts/
thanks,
Gary
I will send it to them, I can just create an offset line do a trim on each end and done. Not alot of extra geo. drawing.
And yeah I new I was cutting the bevel off.
Can someone take a look at this and tell me if I'm missing something here. I am getting no retract between the blend mill and the circle mill on this.
thanks
File attached.
ASSEM5.MCX-7
This is what I'm thinking, just being to lazy to have to re install solidworks and everything else. I keep telling myself everything is going this way towards 8 and just hang in there. This last one has been a real arse kicker though.
We uninstalled and re-installed (or tried) x7 but it halts part way through and says can't be completed and to try again later. This is on windows 8, our reseller was in and didn't have any luck and sent the log file to mastercam. I had programmed quite a few jobs before the uninstall so its kinda kicking my arse not having it. I have deleted everything x7 related including the reg. but
no luck. Has anyone seen this, or got any ideas?
thanks
Gary
Does anyone know of a software that you can push a complex solid into a block or feature for use in a nest ect. I am
running solidworks and mastercam and can do mold style ops such as indent, cavity ect. but, is there a way to push an item into a block
past the center line and leave an impression that doesn't leave all the undercuts. Say like you ran a car into some wax then backed up.
This would save tons of time in part nesting operations. Any thoughts on this would be greatly appreciated.
I have a new puter, and am running the most current x7 maintance. I put x6 off my disk on there as well but how where can i go to download the latest release of x6? The mastercam sight only has x7 from what
I see.
thanks
Where is the download link on youtube? Not a big user of it and am sure I'm just over looking it. Model looks sweet, hopefully I have something to convert it.
thanks again.
Does anyone have one of these to share by chance? It would be greatly appreciated. Does this machine setup come in mastercam already? I am not sure where to look. Or can I get a hold of AXSYS SOLUTIONS (our reseller) and they might provide this? New to the trunnion as you can tell, and am only currently looking to do positioning on it.
thanks
Gary
What speeds and feeds does the machine have? We cut this material also for check fixtures. highspeed area clearance with 70% stepover .3 step down and 300-400ipm works good on our haas. If you select min vertical retract with "output feed moves" checked it does a good job of not jumping all over the part and having lots of retracts.
There is a pitch callout as well as the radius at top and bottom of flute. Print calls for .3745 +.0000-.0005. I am hoping that is just for the ends where maybe a bearing goes, I am waiting to here back. Just trying to get a pre planning done. Tbe radius on top is also required to be +-.005
Just looking for how you guys would tackle this part. I have axis to a 4ax haas. Part is about 14long and shaft diameter is .374 lobe diameter is .860. Material is s7 heat treated to 60rc when done. Just looks like a chattering pain to me.
Any ideas would be appreciated.
Gary
http://www.emastercam.com/board/uploads/monthly_01_2011/post-735-0-97816000-1294236014_thumb.jpg
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.