Bruce Caulley
-
Posts
1,530 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Bruce Caulley
-
If you are using comp don't these machines use a diameter instead of a radius in the tool table? Could this be causing the arc faults??????? I miss the simplicity of my old MX2 but never got the chance to run any posted code on it. Good luck Bruce
-
Roger, Posts alright, but I don't get a doc file??? Do I need to set anything? Bruce
-
Bunny, I see now where you are coming from. If it was a hardware accel issue would it happen all the time and not just now and then? Hardmill, NCI path is ok. I think that this and other niggles that I have are caused by moving from one PC to another depending on what shift I am on. I am one of three permanant programmers but we share two MC dongles between 3 pc's. One is just a standard pentium 4 but the others are a xeon and a twin xeon, both with all the bells and whistles. Bruce
-
I'll clarify. The computer doesn't lock up, I just dont get the window. When this happems I use the change nci tick box in the tool parameters page. I only re-boot to see if I have picked up a conflicting configuration from the network. This is a nuisance that occurs occasionally. quote: It may look strange , but most of the issues of file ->get ,file-save like this can have connection to display driver problems This is not a file get , file save issue. Thanks anyway Bruce
-
I think 2 topics might be getting confused here.
-
I am using windows 2000 pro. We have recently installed MR 0304 but the problem existed even before SP2. Since it doesn't happen very often I think I will just live with it until my pc is upgraded. Bruce
-
-
new CHooks -> ncdatasheet, chgnci
Bruce Caulley replied to Andreas Stute - InterCAM's topic in Industrial Forum
Champion! Bruce -
Every now and then when I need to alter the NCI on a single operation group, I right click-options-change nci destination and then instead of getting a window nothing happens. I have tried re-booting but this does not work all the time. This has been an issue for a while and not just since playing around with the changenci c-hook. Bruce
-
new CHooks -> ncdatasheet, chgnci
Bruce Caulley replied to Andreas Stute - InterCAM's topic in Industrial Forum
Gismo did a great job on these and was open to all suggestions. Many thanks. Bruce -
They do have maintenance and support issues which sucks, but the controller is fantastic IMO. A good 5 axis post is now available for heidanhein so don't let that worry you. Sounds like everyone has made your mind up for you. Bruce
-
Sike, While everyone is waiting for X you would have every forum members undivided attention if you had a problem. Give it a go and let us know what happens. Bruce
-
I also had the "grouped" button ticked. What I think is happening is that it is counting from the first group and not from where I selected. The first 10 operation groups start from 1000. I will e-mail you a screen shot. Bruce
-
Where abouts are you? I am a bit busy to help but it is nice to know that some forum members are local. Bruce
-
Jack, So you're just visiting then? Bruce
-
Gismo, Thats excellent, but if I select the 10th through to 20th operation groups and start my sequence at 5000 and increments of 10, it numbers my nci's starting from 5100. Bruce the nci beta tester.
-
Thad, I do this now. The problem is that we use a different nci for each tool and use them in a sub programme. So on the front face I could have from 5010 to 5140 in increments of 10. If I have 20 tools in one face and 30 in another ie 2010 - 2300 and I use Gismos chook, I end up with all 5000 series programmes. It is not a common way of doing things but it works well when we need to make changes to a tool. Bruce
-
Gismo, Still no luck. I logged off the network, deleted temp files, re-started PC. Any chance of an e-mail??? Bruce
-
Gismo, The one I have downloaded has a modification date of 9/10/2004 12:08. Is this the right one?? Bruce
-
Gismo, I am having trouble with the link. I will try again later. Thanks again.
-
1 step ahead of me!!! Has the link been updated?? Bruce
-
Any chance this can work only on selected operations? I have multiple ops in my files using different WCS. Depending on the face that they are on the NCI will start with a different #. ie top face 1010 front face 5010 right face 2010 etc etc... Bruce
-
-
LEGEND!!!!!!! Since you are developing some really cool stuff, I have a suggestion. Can the prog# field automatically be the same as the nci? This and the other chooks you have made available have made developing new setup documentation a breeze. Bruce
-