ggamalski
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by ggamalski
-
Very interesting thread. If I understand correctly, the plate will warp less if I drill a hole and contour out a thru pocket than if I use pocket and ramp my way thru it?
-
with block font i use modify, break, draft/line. in toolpath i use contour. window around entities. in toolpath parameters use ramp, comp off, no lead in-lead out and xy stock=0
-
xform, squash
-
check rapid retract in the dialog box for that op. also that would happen to me when retract rate was set to 0.0
-
3/4 INSERT MILL FOR P-20 REST MACHINING
ggamalski replied to Matt Berube at Ferron Mold's topic in Industrial Forum
Why not use surface, rough, pocket and let the cutter helix in? -
How much post-processor editing goes on out there. I rarely edit my programs... sometimes my operators will tweek in a spindle speed or feedrate but, in 99% of the files don't get touched. Maybe I need to get out of this cave and get into the "real" world, it's just so 'comfy in here though
-
Semi OT - Fadal servo coolant (machine and post Q's)
ggamalski replied to Tom Szelag's topic in Industrial Forum
I meant T-2 instead of T_2 -
Semi OT - Fadal servo coolant (machine and post Q's)
ggamalski replied to Tom Szelag's topic in Industrial Forum
If the tool carousal/turret is vertical versus horizontal with the tool change arm, insert a T_2 in the code before the tool change line and the carousal/turret will index -
If it's g-code programming try a G8 at the beginning of the tool/program