3 minutes ago, nickbe10 said:

post has been "broken".

this is not likely since it's a new install, new machine . I am the only one who could have broken the post but i didn't change anything.

unless it was a virus... not likely either. I think.

I have mpmaster now, and I set it as default into the configuration file, but the machine def. won't see it . its not on the drop down list yet.

I double checked .. it is where the path describes. 

It seems that I do have admin. rights on this laptop that is new as well.

so i figured out how to make a new definition without the fourth axis and tried a post with mpfan ... no luck, I still got the A0. 

I will see what goes on once the tech people here let me have mpmaster, hopefuly that will fix the problem.

( I call the machine mine but it's not. ) thanks again    nickbe10

On 9/12/2018 at 3:55 PM, Ewood42 said:

When would you "not want" the A-Axis being output?..

My new heartford mill has the fourth axis removed , so it stops with A0 and won,t run. I've had to edit each post as a result.

I tried with cimco to edit mpfan like mentioned here  to no avail, the code is not found even in part.

 #sav_rot_on_x = rot_on_x

also I saw the note in the post that says not to edit with cimco after 2018. I am using 2018... So i tried in the machine configuration like is suggested. also to no avail.

I found the A axis listed in the table group, unchecked the box , but it still posted the A0. 

so I went into machine axis combinations , found the A axis again but the box won't uncheck! ?

is there something that I am missing?

thanks in advance

2 hours ago, LucasGC said:

nesting on a sheet

hmm, I didnt know about this function so thanks for that!

mine seems to work like it says. is it possible that you have unnoticed geometry,... sometimes a model will have a shard sticking out that is difficult to see,

causing your sizing problem.

does bounding box work tight to the part?

I have had blanked items throw out the part size , but that was years ago.

I dont have x9 but have you looked at system configure, colors ... it's quite a list. Selection is there but i d k if it's the one you need.

1 hour ago, RonC. said:

my file went back to the first time I saved it

would you like help to set up your auto save?

mine is called Backup . it fires all the time, no prompt, rewrites over it's self and lands beside my original file.

if you can get them to use Parasolids format, it's better than iges. 

It's good that didn't change. you never know what to expect!

create a horizontal line in x then analyze angle between the two?

you could try calling it a few 10ths smaller, or reprocess the previous path with the tool slightly larger to trick the system.

I suppoze we'll never again double push the D key for "Done, Do it." but at least we don't have to use rotary phones to talk about it! lol.

21 hours ago, Roger said:

Yes, an old hat!  Why only 8 post from you

Hey the forum is working again!

New Job new freedoms.

20 minutes ago, Roger said:

I STARTED with V6.  Currently using 2019

oh, so your saying that u r old hat like me! lol 

1 hour ago, Dan_AKA_ROY said:

I started with V9, Steve. I loved it. Loved the X series and the newer interface is great, also. (I like Mastercam  lol)

The old boss was too busy / lazy to learn the change, So we had X versions that we never used.!

41 minutes ago, Roger said:

V6 Here.......(The only CAD software I've used!)  I  Mastercam!

wow don't u mean X-6 ? V6 is what , 20 years old? how could that be compatible with today's in coming CAD? 

On 4/29/2016 at 8:34 AM, David Conigliaro CNC Software Inc. said:

Use the  'ctrl' button to temporarily disable the autocursor when you simply don;t want it snapping to anything.

That is what I've been looking for. thx.

I even asked Tech support, to no avail.

Subject: auto curser lock toggle

"Good morning

I hope all is well today.

I am wondering how to disable the auto cursor . To enter “sketch mode” has been elusive.

Thx

Steve S"

lots has changed since V-9 lol

Thank you !!!

On 12/9/2015 at 12:13 PM, Tomarik said:

When using "Hide", if you have any geometry selected on the screen, this becomes your "displayed" geometry, and everything else is temporarily hidden. Pressing ALT + E again, un-hides everything.

alt+ to uhide more and alt- to hide more. these used to be there,,with 2018 I had to add them with keymapping. handy stuff to have!

1 hour ago, JParis said:

I tried this early on in the X evolution,

funny, I missed most of the X revolution. pretty well jumped from V9.1 to 2017 /18 . I started with V6 !

I am liking the new stuff better than the x series. I find it easier to locate the stuff I want.

I told that old boss to up grade ALREADY lol!

thx for the comment J.

I am definitely going to pimp out the right click menu too.

I never thought of adding tool paths to it, I like the idea.

Hi all, and thanks for the good reading.

I like the key mapping.

The corner button beside the 1 with alt.  "`" I always assign to create line end points.

- alt period I use for modify trim / extend.

- alt + is for unhide some .

-alt - is set to hide more.

of coarse I like all the graphics views along the numbers too.