-
Posts
245 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Seedy steve
-
-
3 minutes ago, Brad St. said:
Sorry to hijack back to groups but am I missing something when I export a group with sub groups that it places all the ops inside the main exported group name?
Is there a feature that would allow you to keep the group structure when exporting\importing?
IDK but there is more than one method to import... if u drag a mc file and drop it in your toolpath manager with left button, u get instant import.
merging new part into old file is the best way to keep stuff intact... file merge.
then delete or move original part...
- 1
-
I could probably get 2017 back but I am used to this now. so hopefully I can use it until I retire.
already have to translate solid works files into parasolids to read them... I may be forced to update by something like that idk.
-
1 hour ago, Aaron Eberhard said:
What version
I use 2019 but I wish I had stayed with 2017.
I am not interested in what they have degraded to lately, Sorry.
even if there is a use for the wasted space.
I don't want a new bag of faults to get used to and account for.
every release , it takes more mouse clicks to get the job done.
More pain in the a$$.
29 minutes ago, Aaron Eberhard said:That's a hard disagree from me
Wow u can make it show 9 !
LAME.
but thanks for the reply.
- 1
- 2
-
13 minutes ago, AHarrison1 said:
You can expand the features window height, not by much thou, maybe double the height or so.
Hover mouse on bottom edge of the features window, mouse should change to double arrow up and down then drag
yes I know, thanks, but that is ridiculous. it goes back. it won't stay for next time. in 2017 that manager is far superior!
they ruined it in 2019 and just left it that way? I say again what is the rest of the window for? if I had a student that put out that kind of trash , I would give them a reprimand for not completing the job! these guys keep the crap and don't even notice? it makes me ill that they leave it broken!
-
-
14 hours ago, Aaron Eberhard said:
nd hit Alt+E - it'll expand both groups
FYI, the alt is irrelevant, the short cut is a single key. E
- 1
- 1
-
9 minutes ago, Colin Gilchrist said:
Try this:
Click on the "Machine Group",
Also try selecting one toolpath.... press E a few times.
11 minutes ago, Colin Gilchrist said:expand and collapse
everything below it changes state
- 1
-
18 hours ago, Threept82 said:
Any ideas on why it will not bore twice in the same spot?
Thanks
just copy the op. and run it twice. reverse order on copy.
-
there is a path called finish leftover hiding away.
u can use use comand finder on home strip to get it out.
- 1
-
-
"Yes, this is a legit problem. The finish pass of a Dynamic Contour toolpath is simply driven directly to the chain, with no regard of the minimum radius setting. We have request #R-14452 logged to add support for a separate min radius for the finish pass."
1 hour ago, Chally72 said:If you already have a request number
found the reply.
-
50 minutes ago, crazy^millman said:
Again we all use it different and do different types of work
we build automation lines. barely need my 5th axis most of the time.
I don't miss mold work. this low stress life is good for me.
the odd big job comes. I have a 8 foot plate of aluminum coming that has a 14 page drawing!
but no 3d work on it.
it's all the little things that used to save time and clicks that I miss.
it was innovative, built intuitive and lean.
I could pause to repair geometry in the middle of chaining for a toolpath, and then continue with out missing a beat.
oh well, those times are long gone.
- 1
-
41 minutes ago, So not a Guru said:
Won't selecting Translucency, in the View tab, fix this?
yes it would thanks , I do forget about that setting... sometimes nice, but it gets confusing at times.
maybe I can set a hot key for it? then I would remember.
hunting and clicking with mouse gets old fast.
I miss single key menu items.
- 1
-
3 minutes ago, crazy^millman said:
referring to with the Toolpath display
here there are 3 depth cuts, I can see only 1
likely this has been that way for a long time .
I am still relatively new to the last 15 years of changes.
that is why it is so obvious for me all the good stuff that has been left behind and kicked to the side.
version 9.1 is still a formidable bit of software. superior in AT LEAST as many ways as it is inferior to MC2019 and the like.
-
On 3/30/2021 at 11:51 AM, Chally72 said:
That minimum toolpath radius is controlling the roughing motion of the path, not the finishing. In what situation is this causing a problem? Have a picture or file? My guess would be that you had it set to a large value, the roughing left a lot in the corners because it was respecting that value, and then the finishing path came in and overengaged and perhaps broke a tool?
Hey Chally, any I idea if they fixed this flaw yet?
It is NEVER good to leave stock in a corner for the finish path.
If it is fixed, I might update from mc2019
S.
-
off topic, a bit,,
and sorry for the bashing.
When did they stop showing toolpath display thru shaded faces?
it almost caught me yesterday,
I like it better the other way where you could always see toolpaths no matter what!.
typical old me.
-
On 1/4/2022 at 12:53 PM, Tim Sureline said:
the true size dosent show up on the screen i keep spitting out .000
That should not be posable! .
If it is a setting, then What is it good for?
why would there be a a setting like that?
SAD!
-
On 1/8/2022 at 2:49 PM, ChrisVermaak said:
Thank you very much
I have changed to the Dark Grey theme and that worked. Now I know to change that colour
Could you also help where when I import Solidworks model into the Grey Theme with shading
here is what I do, black is badass.
the arrow points to the control for the toolpath manager scheme.
Windows has a good dark theme too.
- 1
-
1 hour ago, TERRYH said:
Not really sure what blanked surfaces are or how to look for them never heard of them. All I know is after 11 years I've never had issues like we've found in 2022.
it is sad that the program is going that way, but it has been for many years consecutively.
20 years ago there were so many innovative aspects to everything you did. like input fields preloading with known values. not any more. !
-
did u look for blanked entities?
maybe something is there.
-
do you use Cimco to edit the NC file?
-
if you replace all "G0" with eg. "G1 F500" won't that work?
-
is there not an easy replace feature in Cimco edit that would work for that?
14 minutes ago, raidersmachinist said:if i change it to a G01 with a feed it does fine
-
2 hours ago, Rstewart said:
but I've forgotten....
idk lol
my graphics back ground is black, maybe it leaked over?
thanks Colin.
- 1
HELIX BORE?
in Industrial Forum
Posted
some times a path will get a bug up it's a$$ that wont go away until u delete the path and make a new one.
maybe that's it?