The only advice I found doing a search was regarding the Control Def settings, but that didn't do the trick

WOW! I couldn't believe the quick response. Thanks guys! That did the trick, but now how do I limit the characters/block to less than 80 characters. The Haas controller errors when I have too many characters on one block.

The gentleman on this forum have been very helpful. Most of my questions and problems have been solved by searching the archives, but now I'm stumped on a problem regarding my Haas Post. How do I eliminate the "|" in the following example? My Haas doesn't like it. Thanks. % O0000 (TEST) (MASTERCAM - X) (MCX FILE - C:DOCUMENTS AND SETTINGSMATTGDESKTOP11283_B_MAIN_INS.MCX) (MATERIAL - NONE) (PROGRAM - TEST.NC) (DATE - JUL-28-2006) (TIME - 12:17 PM) (POST DEV - IN-HOUSE SOLUTIONS) (T14 | 2" JETMILL | H14 | D14 | D2.0000" | R0.0780 | FACING.....) (T12 | 1.0" DIA. ISCAR .0625 C.R. X 4.0" LONG | H12 | D12 | D1.0000" | R0.0625 | FACING.....) (T20 | .500 FLAT ENDMILL | H20 | D20 | D0.5000" | | CONTOUR....) (T9 | 5/8" DIA. CHAMFER X 1.50" LONG | H9 | D9 | D0.6300" | | CONTOUR....) (T24 | .0625 BALL | H24 | D24 | D0.0625" | R0.0313 | CONTOUR....) (T2 | 1/2" DIA. SPOT X 2.0" LONG | H2 | D2 | D0.5000" | | DRILL/CBORE) (T5 | .4375 DRILL | H5 | D5 | D0.4375" | | PECK DRILL.) (T17 | 1/2-13 RH TAP X 1.25" LONG | H17 | D17 | D0.5000" | | TAP........) (OVERALL MAX - Z1.) (OVERALL MIN - Z-2.5) G00 G17 G20 G40 G80 G90 (ROUGH FACE) T14 M06 (2" JETMILL) (MAX - Z1.) (MIN - Z.003) G00 G90 G54 X-9.6 Y-5.7499 S1400 M03 G43 H14 Z1. M83 T12 Z.075 G01 Z.029 F170. X8.6