Search the Community
Showing results for tags 'High Feed'.
-
Hi guys, I am about to cut a 17-4 ph part, condition hr1150. It has a few tab/tang arms that are about .25 thick about 3/4 long. I want to make sure not to put any unnecessary heat in the part while cutting. I was going to us a 2" Mitsubish AJX high feed but I am not sure if it will heat the material any more traditional cutters like the apx3000. I have used the AJX before but it was on a part that had no potential for tweaking and stressing. Please let me know what you all think.
-
Hello. I would like to rough this pocket by ramping all the way down, in multiple stepovers, with a high feed face mill. I cant figure out which feature to use, I am using Mastercam 2021 2D/3D. Thank you! Andreas F Validate
-
Hello Guys, I'm machining a 1.25 wide slot 4.5 deep using a 1.0 high feed cutter. The first part of cutting the slot is full diameter of the tool but on the way back the radial depth of cut is .25 so I use the chip thinning formula and my increased my feed. The question I have is how do I get Mastercam to post that out, I don't want to manually go into the program and change the feed for every depth cut. I played with the High feed settings in Mastercam but I'm not getting the desired results, but it could be that I'm not using correct settings. Any ideas? TIA, Greg
Join us!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.