Need help with

[cadcam]

Getting more beer per a part

 

Will cut parts for beer.

 

Can any one telling the going rate as for part to beer ratio?

 

Is it one case to one small part or is that one Rum & Coke to each small part?

[Fig sign]

Jay !

You can use can_opener for cutting .

Set it in the tool holder trohitangential to the vector of gravity .

Use two turns per beer can and do not use any coolant except alcohol

HTH

[cadcam]

Now that is a Helpful hint.. thank you Ol Wise Owl

[Harryman]

This is absolutely a case where a macro should be used. The macro can be as simple or complex as needed to address the ever-changing Beer/Cuba libra/Part valuation ratios.

 

There's just no substitute for doing the math and getting accurate results

[Scott Bond]

quote:

---

Can any one telling the going rate as for part to beer ratio?

---

Jay this reminds me of the time when you still a bachelor .You were shopping for groceries and asked me;;;

"Scott How do I know this is enough toilet paper for these many groceries"

[TREV]

quote:

__________________________________________________

Scott How do I know this is enough toilet paper for these many groceries"

 

__________________________________________________

 

thats why i get paper not plastic to carry them home.never know when you got 1 roll instead of 2

trevor

[Jack Mitchell]

Scott,

 

quote:

---

How do I know this is enough toilet paper for these many groceries?

---

Ahh, to be young strapping bachelors once again. Now I am curious about this as well. Today, we could well ask is this enough antacid for this amount of pepperoni, cucumbers, and some of Condoleezza's peppar

 

I have a notion regarding Jayson and Scott’s bad boy characterization for an up and coming story (sorry that this has taken a long time, but creating an evil character with the right amount of smooge is rather difficult, but at least you guys are gonna be handsome)

 

Still game or bail?

............

............

 

 

Regards, Jack

[Scott Bond]

I'll be your Huckleberry.

[Harryman]

quote:

---

right amount of smooge

---

Yeah, you don't want to mess up the Smooge calculations.

[mayday]

Jay,

this is all I have, hope it helps

 

 

ptlchg_com #beer change common blocks

pcom_moveb

c_40oz #Multiple beer subprogram call

comment # burp

pcan_empty

if beer_quantity < 0, belly = 0

if stagebeer >= one, pbld, n, *yum, "MORE PLEASE", *comment, e

spaces= slurewords

[McRae]

MayDay - Nice Post - did your "Dealer" help you with that??

[P_Scott]

Mayday,

 

Is that a FREE post for beer? "MMMM Beer". As my Homer Simpson bottle opener says.

[cadcam]

Scott you know after have my first kid I had the same thoughts about Dipers.

Then after changing my first diper I freaked and said there is NO WAY HELL!!! we have enough dipers for this Kid

 

As you stated I thought they don't eat much so should not need much.

 

Jack I am game . I know it's all in the name of fun.

 

Mayday does that go at the start and end of the post?

[mayday]

quote:

---

Is that a FREE post for beer?

---

READ THE ****ING FAQ

 

 

quote:

---

Mayday does that go at the start and end of the post

---

hhhhmmmm, Well Jay

 

If you run a fridgidair top of post

Kenmore end of post

 

WARNING: this post has not been tested on any other machine models. use at your own risk