Haas UMC 750SS

[Kyle F]

43 minutes ago, cncappsjames said:

We have a lot of customers that do very well with their Haas machines. They understand what the machine is and what it isn't and work around it.

I just pulled some super slick lookin' 15-5 stainless rocket engine parts off my UMC ! 

Now I'll just be able to do them in half the time on the mx-330 lol

[cncappsjames]

2 hours ago, Kyle F said:

I just pulled some super slick lookin' 15-5 stainless rocket engine parts off my UMC ! 

Now I'll just be able to do them in half the time on the mx-330 lol

Probably not too far off.

This is my latest 3+2 format (for 5-AXis machines built after 12/2021 or machines with the Cycle Time Reduction spec software upgrade);

#996=0.75(CAM TOOL DIA.)
N2T2M06(0.75 in squareend assembly)
G00G17G40G80G90G94G98M132
G49G53P1Z0.0T1M08
N30001S11460M203(OPERATION COMMENT HERE)
G05.1Q1
G00G90G54B-90.0C-180.0
G54.4 P2
G68.2 X0.0 Y0.0 Z0.0 I-90.0 J-90.0 K-90.0
G53.1
X-0.053Y2.0834
G00G43Z0.702H#517S11460M03
G05.1Q3X0Y0Z0
G00Z-0.2979
G01G41X0.2652Y1.7652D#517F120.0
...
G01G40X0.0601Y2.1824
G00Z0.702
G05.1Q0
G00G49G90G53P1Z0.0M229M205
G69
G54.4 P0
G130

(INSERT TOOL BREAKAGE CYCLE HERE IF DESIRED)
M05
M09
G00G17G40G49G80G90G94G98
M01

 

5-Axis w/3DCC;

( *)
#996=0.0313(CAM TOOL DIA.)
N5T5M06(Tapered tool assembly)
G00G17G40G80G90G94G98
G49G53P1Z0.0T6
N50020S12000M203M132(Flow ISO-TC39SC2-N2185 Feature - Side 1)
G05.1Q1
G131F1
G00G90G54B-29.755C122.76
G54.4 P2
G68.2 X0.0 Y0.0 Z0.0 I212.76 J-29.755 K-90.0
G53.1
X-0.4636Y0.5398
G69
G43.8Z1.2495H#517D#517S12000M03
X0.0994Y-1.152Z0.8547,L2I0.5411164J-0.840937K0.004251
X-0.102Y-0.839Z0.2035,L2I0.5411164J-0.840937K0.004251
X-0.1423Y-0.7764Z0.0733,L2I0.5411164J-0.840937K0.004251
G01X-0.1611Y-0.7472Z0.0125F9.0,L2I0.5411164J-0.840937K0.004251

...

X0.1438Y-0.1655B-22.642C-293.154,L2I-0.3899529J-0.9118848K0.1280734
G00X0.1048Y-0.2567Z-0.1284,L2I-0.3899529J-0.9118848K0.1280734
G05.1Q0
G00G90G49
G49G53P1Z0.0
G54.4 P0
G130
M05
G00G17G40G49G80G90G94G98M229
M01

5-Axis w/CC

( *)
#996=0.1875(CAM TOOL DIA.)
N4T4M06(Tapered tool assembly)
G00G17G40G80G90G94G98
G49G53P1Z0.0T5
N50018S12000M203M132(5-Axis Swarf Side Rough +.005 on wall)
G05.1Q1
G00G90G54B-1.016C-5.894
G54.4 P2
G68.2 X0.0 Y0.0 Z0.0 I84.106 J-1.016 K-90.0
G53.1
X0.039Y0.1389
G69
G43.4L1P3Z0.8589H#517S12000M03
G131F1
X0.0379Y0.1358Z0.8602
X0.0511Y0.1344Z0.1103
X0.0537Y0.1341Z-0.0396
G01G41.2X0.0549Y0.134Z-0.1076D#517F90.0

...

G40X0.0476Y0.1333Z-0.1088
G00X0.0356Y0.1512Z0.859
G05.1Q0
G00G90G49
G49G53P1Z0.0
G54.4 P0
G130
M05
G00G17G40G49G80G90G94G98M229
M01

[Kyle F]

7 minutes ago, cncappsjames said:

This is my latest 3+2 format (for 5-AXis machines built after 12/2021 or machines with the Cycle Time Reduction spec software upgrade);

Now you've got me curious,... Our MAM has a build date of 2021-5, and the MX-330 is 2020-08.

Over the past week or two we've had a guy from FANUC come and update both machines, and now PQI is here setting up all the Renishaw goodies..

Is there an easy way to tell if that cycle time reduction spec was included? 

[cncappsjames]

On 2/28/2024 at 2:08 PM, Kyle F said:

...

Is there an easy way to tell if that cycle time reduction spec was included? 

FANUC doesn't install the Matsuura software ever. What Series and Edition was installed? It should be on the FANUC service report.

PQI does not update Matsuura software. They may install Renishaw iHMI.

Productivity "might" be able to. If anyone else besides Matsuura or I can do the Matsuura software it would be Productivity.

[Kyle F]

18 hours ago, cncappsjames said:

FANUC doesn't install the Matsuura software ever. What Series and Edition was installed? It should be on the FANUC service report.

it's the 31i-B5

[cncappsjames]

4 minutes ago, Kyle F said:

it's the 31i-B5

That's not the "software" series and edition, that's the "control" series.

Go to the parameter screens, right arrow soft-key over to the "SYSTEM" soft-key.

You should see something like this;

  CEXEAPL        FR32     0009    
 CEXEDATA0      FM51     03.0    
 CEXEDATA1      FM10     17.0    
 CEXEDATA4      FM09     38.0    
 EMBED ETHER    658M     23.0    
 USB SOFT       659A     05.0    
 ETHERNET       658K     25.0    
 IHMI(SYSTEM)   BX72     0019    
 IHMI(MACROM)   BX72     0019  ETHER/DTSVR    6569     32.0

 

Page up maybe 1 or 2 screens

 2.SOFTWARE CONFIGURATION
    SYSTEM     SERIES  EDITION
+------------+--------+--------+
 CNC(SYSTEM1)   G423     35.0    
 CNC(SYSTEM2)   G423     35.0    
 CNC(SYSTEM3)   G423     35.0    
 CNC(SYSTEM4)   G423     35.0    
 CNC(MSG1)      G423     35.0    
 CNC(MSG2)      G423     35.0    
 CNC(MSG3)      G423     35.0    
 CNC(MSG4)      G423     35.0    
 CNC(MSG5)      G423     35.0    
 BOOT           60WH     0001   

This is what I need.

[Kyle F]

16 minutes ago, cncappsjames said:

That's not the "software" series and edition, that's the "control" series.

 

apologies!

 

[cncappsjames]

Page up from there... we need to see the CNC System Series and Edition.

[Kyle F]

@cncappsjames bear with me lol

 

 

[cncappsjames]

The Series and Edition are up to spec to support the Matsuura software update... G423 and 49.0 are the minimum. You're at G423 and 69.0

 

[cncappsjames]

If you go the the maintenance tab on the Matsuura overlay, go to the.... maybe WEEKLY button... then right arrow soft-key to IPC PARAM soft-key. A table shoud show. In the upper right corner of the FANUC section of the screen you'll see PAGE  x/x. It's either be x/5 or x/4 or x/3 (unlikely) the "x" being 1, 2, 3, etc...

[cncappsjames]

@Kyle F Have PQI modiy this to suit your machine then upload this Fixed Form Data to your machine. This is an easy way to create In-Process measurement cycles into an existing part program.

FIXFRM_MX-iHMI.DAT

[Kyle F]

@cncappsjames ooooh PQI finished up training this morning and is already flown out of Texas... At least I do have CIMCO probing for mastercam so that should make in-process probing pretty simple. I have already reached out to CIMCO about getting the updated renishaw routines for PQI + Matsuura collaboration.

Good to know though that the option is there for the "cycle time upgrade" you were  speaking about. 

[cncappsjames]

If you're using CAMPlete for post processing, the CIMCO Probing package add-on is not compatible with CAMplete.

Send me your PQI InspectionPlus manual and I can modify the Fixed Sentence file and you can read it in. It's got some extra goodies in it as well.

[Kyle F]

5 minutes ago, cncappsjames said:

If you're using CAMPlete for post processing, the CIMCO Probing package add-on is not compatible with CAMplete.

Send me your PQI InspectionPlus manual and I can modify the Fixed Sentence file and you can read it in. It's got some extra goodies in it as well.

whhhaaaaaat? That makes me sad I love CIMCO for probing. Next week I'm finally getting training with an AE on the machines, I have so many questions lol. 

I am working from home right now so I will have to get back with you next week on that. Appreciate the help on all of this 

[cncappsjames]

2 hours ago, Kyle F said:

whhhaaaaaat? That makes me sad I love CIMCO for probing. Next week I'm finally getting training with an AE on the machines, I have so many questions lol.

Yeah. The only way to get probing into CAMplete and have it simulate is to program it with Fusion360 or CAMplete's clunky probing stuff (which I never use).

Double check with your PQI guy that they set up the (REN*FCS*TO*WCS) (usually in O9744 but PQI does some funky stuff where they deviate from the Renishaw standard with their Renishaw InspectionPlus installs).

 

(************************)
N30
(FCS*TO*WCS*CALC)
(ONLY SET WCS FOR TABLE TYPE ROTARY AXIS)
(ALL TOOL TYPE ROTARY AXIS = 0)
#1=0
#2=#5024
#3=#5025

Set your tilt and rotary variables based on A/B, A/C, or B/C configuration. The above example is for a B/C kinematic machine. 

#5024 = Machine Coordinate for 4th Axis

#5025 = Machine Coordinate for 5th Axis

 

If your Yamazen AE can't answer your questions, hit me up.

[Leon82]

I modified a post to post out probing and use a manual entry text file. The block numbers are MB1, ECT so Camplete inserts the gcode into the program. So there is no hand editing. It supports 550 lines of code. I usually add more when I'm bored as it's quite laborious.

[Kyle F]

3 hours ago, cncappsjames said:

If your Yamazen AE can't answer your questions, hit me up.

 you are the man

2 hours ago, Leon82 said:

I modified a post to post out probing and use a manual entry text file. The block numbers are MB1, ECT so Camplete inserts the gcode into the program. So there is no hand editing. It supports 550 lines of code. I usually add more when I'm bored as it's quite laborious.

I would be okay with something like that. Thank you leon, I may recommend that if the AE has no better idea.

[Leon82]

46 minutes ago, Kyle F said:

 you are the man

I would be okay with something like that. Thank you leon, I may recommend that if the AE has no better idea.

This is the post I made about it

 

https://www.emastercam.com/forums/topic/101640-some-camplete-tricks-i-worked-on/?do=findComment&comment=1298142

[cncappsjames]

15 hours ago, Leon82 said:

I modified a post to post out probing and use a manual entry text file. The block numbers are MB1, ECT so Camplete inserts the gcode into the program. So there is no hand editing. It supports 550 lines of code. I usually add more when I'm bored as it's quite laborious.

It just won't simulate. When I have proven probing cycles that's what I do... Manual Entries. 

[Kyle F]

On 3/1/2024 at 11:31 PM, Leon82 said:

This is the post I made about it

 

https://www.emastercam.com/forums/topic/101640-some-camplete-tricks-i-worked-on/?do=findComment&comment=1298142

Thanks, I have a lot to learn!! lots going over my head haha but I'll get there eventually 

[cncappsjames]

2 hours ago, Kyle F said:

Thanks, I have a lot to learn!! lots going over my head haha but I'll get there eventually 

We're here to help, and shorten the curve where we can.

[GIZMO 21]

good stuff..

we actually have cimco coming out tomorow to demo the cimco probing.

i am using CAMplete to post for our matsuura mx-520 and our mazak variaxis i-300 and i was worried

about this integration for the probing part of it. i already reached out to Danish from camplete but still waiting for his response.

[cncappsjames]

2 hours ago, GIZMO 21 said:

good stuff..

we actually have cimco coming out tomorow to demo the cimco probing.

i am using CAMplete to post for our matsuura mx-520 and our mazak variaxis i-300 and i was worried

about this integration for the probing part of it. i already reached out to Danish from camplete but still waiting for his response.

Let us know what he says. They add stuff every build and I don't always pay as close attention to the new features as I probably should.

 

What can I say, I'm a work in progress.

[Kyle F]

6 hours ago, GIZMO 21 said:

good stuff..

we actually have cimco coming out tomorow to demo the cimco probing.

i am using CAMplete to post for our matsuura mx-520 and our mazak variaxis i-300 and i was worried

about this integration for the probing part of it. i already reached out to Danish from camplete but still waiting for his response.

Yes I am very curious of what your findings will be!