Emuge Thriller

[jwvt88]

Good morning,

I came across an excellent application for one of these tools today in a part we run hundreds of thousands of per year. 

https://www.instagram.com/p/CkUvZIBJ1IH/?img_index=1

Is anyone using these? If so are you just using a threadmill cycle or are you using a custom drill cycle? None of us here have used the custom drill cycles before and I can't seem to find a tutorial online for a threadmill type of application. Any ideas or experience you've had with these or the guhring type(or any other types)?

 

Thanks

[Aaron Eberhard]

That looks awesome for the right application! 

I haven't checked out the documentation, but from the video it looks like a standard threadmill operation, plunge to the middle (drill), threadmill upwards climb cutting.

[JoshC]

Thriller?

 

[Corey Hampshire]

Following this topic because I was literally talking with my co-workers about wanting to try these (Vardex makes similar items). I would like to try some and I have an application for them. 

[cruzila]

I imagine you could use a threadmill cycle and use the feed in to do the drilling part. Should not be that complicated to program.