License limitation

[Hertz]

Good morning, I'm trying to do a 3D toolpath flowline but unfortunately the license we have has one surface/solid face at a time only. The toolpath I have is basically a large chamfer along 2 edges with a radius in the middle (technically 3 surfaces) so when I try to do a 3d toolpath, I get the error with the license. Is there a way to merge surfaces to make it as one to be able to use the toolpath? Or is there another way I can achieve when I want to do? I attached a screenshot of the toolpath I'm looking to do.

[#Rekd™]

Use the 2D swept toolpaths or the Model Chamfer toolpath.

[CEMENTHEAD]

If you create curves on the top and bottom of your chamfers you can use loft or ruled to make a single surface.

[Hertz]

42 minutes ago, CEMENTHEAD said:

If you create curves on the top and bottom of your chamfers you can use loft or ruled to make a single surface.

This did it. Thank you very much. I didn't even realize I could do this. Appreciate it very much.