Mitsubishi CX20 post

[Dennis (Belgium)]

Hello,

 

could anyone help me with the wright post for a Mitsubishi CX20 wire machine. i have the mill and wire of mastercam. i have a post for mistsu but it sucks. when i try to program 4-axis and post it to the machine... no good

I asked my reseller but he seems to have to much work. pfff

 

Regards, Dennis ( [email protected] )

[Hardmill]

quote:

---

i have a post for mistsu but it sucks. when i try to program 4-axis and post it to the machine... no good

---

If you could be a little more specific, perhaps

someone could help you get started.

Exactly what post are you using??

 

PEACE

[crazy^millman]

After 10 posting guys so sue me. From the guidelines.

quote:

---

11. Issues with your reseller should be resolved directly with your reseller and/or CNC Software. Airing out your issues using the forum will not be tolerated.

---

And another one some people just seem to miss:

quote:

---

Rule #1: Don't ask for a Post Processor.

 

Ask this question as your first message here and you won't necessarily like the responses you receive. The eMastercam.com Lynch Mob is on much higher alert than you could ever imagine.

 

Look to your reseller to supply you with the proper post for your machine, or quote for the work that needs to be done.

 

If you have something and are looking for improvements, it's a reasonable request. Maybe tell us why the post you have needs improvement.

 

Perhaps try to participate a bit on the Forum before you go asking for something. Not unlike Habitat for Humanity, we value Sweat Equity here. Quid pro quo, Clarice.

 

You may also want to let everyone know your company name so that your Hotmail or Yahoo email account doesn't give everyone the impression that you aren't a licensed Mastercam user.

---

Sorry we can help you tweak your post with spefic question and by you psoting up bad code and good code with an example help you get to the point you want but the right post is going to take some sewat equaity by you or money and patience through your dealer. Feel your dealer is not taking care of you take it up with CNC software not here thus rule 11. Thank you and have a nice day there me I am going ot bed Good night. Not a just a freindly reminder.

 

We played it nice and yet this still stays

quote:

---

emastercam Lynch Mob is on much higher alert than you could ever imagine.

---

so I say if the shoe fits wear it.

[Lars Christensen]

CX20, man that brings back memories

 

Dennis, as Millman sayes, no free post, but we will help you tweak it. Give us some code.

 

Lars

[Roger Martin from CNC Software]

Dennis,

 

I do not know what version of MC Wire you have, but I would suggest trying the MPW-FA10.PST on the (v9 and higher) CD. It has several common configuration options. Check the 'User Preference Settings' section in the PST.

[Dennis (Belgium)]

Hey thanks for all the replys untill now.

 

i have the mc 9.1 MR0304 at the moment.

 

regards, dennis

 

first work tomorrow is to check it