No rapids when posting

[Thad]

Below is some sample code of an L-shaped contour path taking 2 depth cuts. At the end of the first pass, it should rapid to the retract (Line 10), rapid to the start position, and then take the second pass. Rapid retract is checked, but even if it wasn't, it should rapid back to the start position. This is from a V9 post that was updated with the update post chook. It's a modified MPFAN post.

 

Where should I look to change this?

 

 

%

O0000(MACHINE_GROUP_1)

(2.0 WAUK W/ .236 RADS)

N1G0G17G54G40G49G80G90

N2G43H1Z2.

N3G0G90X-2.8856Y3.1474

N4S1600

N5M3

N6Z.1

N7G1Z-.5F55.

N8X4.758

N9Y-2.7066

N10Z.25 <------SHOULD BE G0

N11X-2.8856Y3.1474

N12Z-.4

N13G1Z-1.

N14X4.758

N15Y-2.7066

N16Z2.

N17M19

N18M09

N19M30

%

 

Thad

[Storkman]

look at your prapidout line Thad.

[Guest]

Nevermind, I just reread your post

[Fred @ Slate Industries]

Thad

When I post some of my Feed rates are 0

It has been logged as a Bug.

The Retract in rapid is checked and thus

the feed in that greyed box says 0 ,

but its reading that box still and posting 0.

 

HTH

[Thad]

Thanks Stork.

 

Thanks for the tip, Tony. I've seen other threads talk about that and I've got them bookmarked.

 

Thad

[Jimmy Wakeford from Barefoot CNC]

Thad

Check this topic, I think you'll find it applies to prapidout also

http://www.emastercam.com/ubb/ultimatebb.p...ic;f=1;t=016956

[Paul Decelles]

I know you have heard this before... zip2go the file and send it to [email protected]. We have to determine exactly what the issue is before we can fix it (sounds like it could be the same issue Tony ran into but we need to be sure). It could be an issue with the post, it could be an issue in the .nci file or it could be an issue with MP. It is impossible to say without having the files.

[Thad]

I'll get it out in the morning, Paul. I was going to pass it off as "one of those things," but you're right...it worked *before* the post update so it should be looked at.

 

Thad

[Thad]

Paul, you've got mail.

 

 

Jimmy, that worked perfectly. Thanks bro!

 

Thad

[Thad]

Oops! Props to Storkman too.

 

Thad

[Shawn Wentzel- Wenteq Inc]

I had noticed a problem when the feed and plunge rate the same, it woul not put in G01 code. I would put a diff feed by 1 ipm and it fixed the prob.

[Thad]

I tried that before making the post edit and it didn't make a difference.

 

Thanks for the input.

 

Thad