What's wrong with the FTP??

[Elad]

Jay,i can't open the ftp,is there any problem??

Thanks,

[cadcam]

Try now.

[Neal Z]

I'm having problems opening this link also.

This is what I get when I try.

FTP Folder Error

Windows cannot access this folder.

Make sure you type the file name

correctly and that you have permission

to access the folder.

Details

the operation timed out

Any ideas what's happening? Thanks

[Bullines]

Jay, if it helps, here's the log of my last attempt to log into your FTP site:

connecting to 64.30.198.207:21

Connected to 64.30.198.207 port 21

220 precision1 Microsoft FTP Service (Version 5.0).

USER mastercam

331 Password required for mastercam.

PASS (hidden)

230-Welcome to Precision Programming FTP site.

230-

230-You will have Access to the folders that the webmaster has given you rights to.

230-

230-please upload all files for mastercam forum users in the Mastercam folder.

230-

230-If you feel you need more access please contact the Webmaster.

[email protected]

230-

230-Thank You for stoppnig by www.ppcadcam.com

230 User mastercam logged in.

CWD /Mastercam forum

250 CWD command successful.

PWD

257 "/Mastercam forum" is current directory.

SYST

215 Windows_NT version 5.0

Host type (S): Microsoft NT

PORT *,*,*,*,7,161

500 'PORT 64,7,141,28,116,190 ': command not understood

! Failed "port":

! Retrieve of folder listing failed (0)

I've *'d out my IP, BTW

[cadcam]

Please give a try now any one or up to 6 at one time.

[Bullines]

Nope. Same thing, Jay. Did you happen to change security settings on any of the folders?

[cadcam]

Can any one eles that has in the past been able to get to the FTP please give it a try.

And either Post or mail me the results thanks.

you should be able to log in and see the folders.

Thanks for you help.

[Mark H]

I was able to get on to ftp://[email protected]/ and see the folders there.

IE 6.0

Win 2k Pro

[ 12-03-2001: Message edited by: Mark H ]

the password is "forum"

[ 12-03-2001: Message edited by: Mark H ]

[Mark H]

I have no problems with the following address either...

ftp://mastercam:[email protected]/Mastercam%20forum/

You people having trouble, are you using FTP software or Microsoft's Internet Explorer?

[Neal Z]

I'm using Microsoft Internet Explorer.

[cadcam]

What Version and are you able to get in now?

Are you going to the ling on this page and useing that?

[Neal Z]

Wasn't able to access the site. I'm using version 5.5, I'm using the link on ftp instruction page.

Cadcam's ftp site

[cadcam]

Neal try down loading the Cuteftp from my web site its on the links page and see if this works for you.

Host: www.ppcadcam.com

User: mastercam

Pass: forum

Port: 21

this is the info needed.

[JAMMAN]

Jay, I've been in and out a couple times today with IE and it works just fine for me.(as a test)

[Neal Z]

I downloaded the file. Where should I put the when I open it up? Thanks

[cadcam]

Extract to the desktop then install.

then you can remove the folder from the desktop.

then use the info i posted. give this a try and keep me updated sir.

[Neal Z]

Sorry i haven't got back sooner. Got the file loaded. Still working on it. We have to change some settings at are end. Working with a firewall.

I'll keep you posted. Thanks.

[Neal Z]

We are up and running. What a great site. I was able to get some files off the ftp site. Took awhile. Awesome

[cadcam]

NEAL Z,Thank you for updating this for me.

This helps me to try and keep it going when there a troubles.

I will be a MIS before i know it.

[Brendan O' Regan]

Jay.

I have no problems with FTP. Been in today and I am using Explorer 6